My 3pro
Attachment 174100
Lots of mods including direct drive, dual z, spring loaded spool, pei plates and custom software on by hardware and screen
And the prusa
Attachment 174101
Stock except for 3rd party pei plates and spool
Printable View
My 3pro
Attachment 174100
Lots of mods including direct drive, dual z, spring loaded spool, pei plates and custom software on by hardware and screen
And the prusa
Attachment 174101
Stock except for 3rd party pei plates and spool
What can you do with the 3 pros software? I hadn't read about modifying that.Quote:
Originally Posted by incisor
For me I'd get the V3 because it has a bunch of upgrades installed and the newer interface is a bonus. I'm definitely a tinkerer but I have limited time at the moment [emoji28]
Lots and lots with the pro running either marlin or the alternatives
I use a custom version of marlin and Repetier
The later models not so much because the display is somewhat custom and not generic stuff like the pro
Both will serve you well
I might never mod it but at least there are plenty of upgrades i could do before moving up in the range.
It's arrived, fun begins now.https://uploads.tapatalk-cdn.com/202...5b45774776.jpg
Attempted to print an Anderson plug bracket I found on thingiverse but both times it gets to about 75% and falls over, I could add a support bit that adds another hour to the print time.
Going to see if I can rotate it 180 degrees so it will be self supporting.
https://uploads.tapatalk-cdn.com/202...c1b47cd9a9.jpg
That did the trick, a perfect fit.
https://uploads.tapatalk-cdn.com/202...c90b138ddf.jpg
Very cool!Quote:
Originally Posted by loanrangie
And as fitted.https://uploads.tapatalk-cdn.com/202...17569b1946.jpg
See what happens when people don't listen to Incisor!
Attachment 179141
