you cant do it that way....
only one digital device can be logged in at once on a single line as a general rule
you need a modem router or modem wireless router
I have 2 pc's setup at home, 1 upstairs and 1 downstairs, both with their own modems. When i login with 1 the other disconnects ? how do i enable them to login at the same time ? I have logged into the modems config browsers and used the same login/ password on each.
MY08 TDV6 SE D3- permagrin ooh yeah
2004 Jayco Freedom tin tent
1998 Triumph Daytona T595
1974 VW Kombi bus
1958 Holden FC special sedan
you cant do it that way....
only one digital device can be logged in at once on a single line as a general rule
you need a modem router or modem wireless router
2007 Discovery 3 SE7 TDV6 2.7
2012 SZ Territory TX 2.7 TDCi
"Make the lie big, make it simple, keep saying it, and eventually they will believe it." -- a warning from Adolf Hitler
"If you don't have a sense of humour, you probably don't have any sense at all!" -- a wise observation by someone else
'If everyone colludes in believing that war is the norm, nobody will recognize the imperative of peace." -- Anne Deveson
“What you leave behind is not what is engraved in stone monuments, but what is woven into the lives of others.” - Pericles
"We can ignore reality, but we cannot ignore the consequences of ignoring reality.” – Ayn Rand
"The happiness of your life depends upon the quality of your thoughts." Marcus Aurelius
You can't have two ADSL modems sharing a single ADSL/telephone line (Which I presume is what you're describing?) as each would be trying to sync to the equipment back at the exchange. I'm kind of suprised they both even sit connected to the same line without the second one causing issues to the working one......never tried to do this though.![]()
The usual way to do this is to use a modem/router to connect to the ADSL line and then connect the PC's to it by ethernet, USB or wireless depending on location and what equipment/cabling you have in place.
You could use one PC and it's modem to then re-share the connection to the other (Again depending on what kit you have available) but this is far less reliable IME, needs the first PC left on for the second to connect to the Internet, and you also need cabling between the PC's rather than to/from the router, which gives you more flexibility.
Jeff
1994 300TDi Defender
2010 TDV8 RRS
Have a read of thisI'm not even going to attempt to say it better than he does
http://www.ozcableguy.com/broadband.html#3.1
MY08 TDV6 SE D3- permagrin ooh yeah
2004 Jayco Freedom tin tent
1998 Triumph Daytona T595
1974 VW Kombi bus
1958 Holden FC special sedan
2007 Discovery 3 SE7 TDV6 2.7
2012 SZ Territory TX 2.7 TDCi
"Make the lie big, make it simple, keep saying it, and eventually they will believe it." -- a warning from Adolf Hitler
"If you don't have a sense of humour, you probably don't have any sense at all!" -- a wise observation by someone else
'If everyone colludes in believing that war is the norm, nobody will recognize the imperative of peace." -- Anne Deveson
“What you leave behind is not what is engraved in stone monuments, but what is woven into the lives of others.” - Pericles
"We can ignore reality, but we cannot ignore the consequences of ignoring reality.” – Ayn Rand
"The happiness of your life depends upon the quality of your thoughts." Marcus Aurelius
If you have a wireless modem/router, I'm guessing this is standalone? If so, you just need this plugged into a phone socket which is hopefully near at least one PC, and then use wireless for the other one? Unless your house is big, or has internal brick walls, you should get a wireless signal that far, but it may take some playing about with the position of the router...
Jeff
1994 300TDi Defender
2010 TDV8 RRS
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks