Results 1 to 5 of 5

Thread: how to remove rear pinion flange

  1. 28th October 2010, 12:44 PM #1
    dragon2000
    dragon2000 is offline Master
    Join Date
    Jan 2009
    Location
    cranbourne, vic
    Posts
    135
    Total Downloaded
    0

    how to remove rear pinion flange

    hi all
    i need to know how to remove the rear pioion flange on my 300tdi disco
    Reply With Quote Reply With Quote
  2. 28th October 2010, 12:47 PM #2
    dragon2000
    dragon2000 is offline Master
    Join Date
    Jan 2009
    Location
    cranbourne, vic
    Posts
    135
    Total Downloaded
    0
    with out using the service tool LRT-51-008
    Reply With Quote Reply With Quote
  3. 28th October 2010, 08:24 PM #3
    Blknight.aus's Avatar
    Blknight.aus
    Blknight.aus is offline RoverLord Vendor
    Join Date
    Aug 2006
    Location
    Melbourn(ish)
    Posts
    26,504
    Total Downloaded
    0
    get a straight peice of 15x5mm steel strapping about 1m long drill it to fit the 2 bolts on the long side of the flange bolt up the strap to the flange and then undo the big nut...

    or use a rattle gun.

    or have someone stand on the brakes while you undo it.

    if its the flange on the tcase

    top gear high range CDL in handbrake on and then undo the nut.
    Dave

    "In a Landrover the other vehicle is your crumple zone."

    For spelling call Rogets, for mechanicing call me.

    Fozzy, 2.25D SIII Ex DCA Ute
    Tdi autoManual d1 (gave it to the Mupion)
    Archaeoptersix 1990 6x6 dual cab(This things staying)


    If you've benefited from one or more of my posts please remember, your taxes paid for my skill sets, I'm just trying to make sure you get your monies worth.
    If you think you're in front on the deal, pay it forwards.
    Reply With Quote Reply With Quote
  4. 29th October 2010, 08:58 AM #4
    German Grüner's Avatar
    German Grüner
    German Grüner is offline Master
    Join Date
    Aug 2009
    Location
    Buenos Aires (Argentina)
    Posts
    150
    Total Downloaded
    0
    You can extract this pin by installing a long M8 screw with nut trough some spacers and pulling by adjusting the nut. You may need help from hot air gun as this part is fixed with loctite.

    Regards
    Reply With Quote Reply With Quote
  5. 30th October 2010, 07:35 AM #5
    camel_landy's Avatar
    camel_landy
    camel_landy is offline YarnMaster
    Join Date
    Jan 1970
    Location
    Nanny state UK...
    Posts
    3,253
    Total Downloaded
    0
    I've always used the handy helper, standing on the brakes approach.

    M
    Reply With Quote Reply With Quote
« Towing a disco | V8 dipstick? »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!