we are geting in xmoor kit so you can do a full diy rebuild of you seats
Discovery 1 Trim Kits - Late Type will be on the phone to them tonight we have full costing sortly![]()
I have managed to split the squab support under the foam on my D1 front seat, any one know where to buy a replacement or repair on the gold Coast?
we are geting in xmoor kit so you can do a full diy rebuild of you seats
Discovery 1 Trim Kits - Late Type will be on the phone to them tonight we have full costing sortly![]()
In one of my previous old rangies the previous owner had used a couple of those thick rubber bungy straps to fix a split rubber and it worked a treat.
MY08 TDV6 SE D3- permagrin ooh yeah
2004 Jayco Freedom tin tent
1998 Triumph Daytona T595
1974 VW Kombi bus
1958 Holden FC special sedan
I did made it, with a piece of PVC tarpaulin, folds sewn with 3 seams.
After this, I copied the holes as original and used the same original wires from older pad. There is no difference to feel in the repaired seat
Regards
Hi Brettsky,
Not sure if you've explored getting second hand seats. The same thing happened to my front drivers seat I picked up a pair of seats in mint condition for $65 each from a local wrecker. I wasted three hours of my life trying to fix the seat and didn't end up with something much better than when it was broken.
Just a thought, you might pick up a bargain.
I have the same problem. A temporary fix I have used was a couple of cushions from the lounge room jammed under the seat cushion and the cross bar. Works a treat once you arse gets used to it. Did a trip from Darwin to Melb and back with no problems. the butt got used to the cushions around Porta Gutta. still trying to figure an easy way to fix it.![]()
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks