Results 1 to 10 of 10

Thread: Sway Bars?

  1. #1
    Join Date
    May 2006
    Location
    Melbourne
    Posts
    385
    Total Downloaded
    0

    Sway Bars?

    Hi, i have a '95 D1 V8 that doesn't have a rear sway bar. Can i retrofit one or does someone make heavy duty ones i can use with disconnects? I do have a longrange petrol tank if that makes a difference.

  2. #2
    Join Date
    Jan 1970
    Location
    Canberra
    Posts
    18,616
    Total Downloaded
    0
    The upadates had rear sways as original (as did the interim update in late 93, early 94) - if yours have been removed get a second hand set and bolt in - assuming the mounts have not been cut off.

    Garry
    REMLR 243

    2007 Range Rover Sport TDV6
    1977 FC 101
    1976 Jaguar XJ12C
    1973 Haflinger AP700
    1971 Jaguar V12 E-Type Series 3 Roadster
    1957 Series 1 88"
    1957 Series 1 88" Station Wagon

  3. #3
    Join Date
    Aug 2008
    Location
    Perth
    Posts
    1,209
    Total Downloaded
    0
    Yeah, you should have had one originally.

    Some long range tanks require spacing of the mounts, so yours was probably just removed when they put the tank in.

    Look on the chassis rails on either side of the tank, there should be square shaped mounts welded on.

    Just get a second hand one and a couple of blocks for spacing to clear the tank and re-attach.

    Not really sure about heavy duty sway bars, I think someone did them years ago, white something I think?

    You can get quick disconnects from the US, do a search on them I'm sure they'll turn up.

    Here you go, one option, look under products and Land Rover: http://www.aedofab.com/

  4. #4
    Join Date
    May 2006
    Location
    Melbourne
    Posts
    385
    Total Downloaded
    0
    Had a look and all the original mounts are still there.
    How much difference will the rear sway bar make to on road handling?
    And will it make much difference off road?
    Are disconnects worth it?

  5. #5
    Join Date
    Sep 2010
    Location
    melton, vic
    Posts
    440
    Total Downloaded
    0
    PM sent

  6. #6
    Join Date
    Sep 2006
    Location
    Parkdale Vic
    Posts
    568
    Total Downloaded
    0
    I took mine off because it was rubbing on the long range tank.
    Can hardly feel any differance in handling.
    Cheers Dean.

  7. #7
    Join Date
    Apr 2007
    Location
    Tassie
    Posts
    171
    Total Downloaded
    0
    It depends on how much you want to spend, but there are these I have no idea what they would be like, but they are unusual thats for sure
    X-eng High Performance Off-Road Engineering
    Cheers Peter

  8. #8
    Join Date
    Aug 2007
    Location
    Gosnells
    Posts
    6,148
    Total Downloaded
    0
    Quote Originally Posted by vogue View Post
    ....How much difference will the rear sway bar make to on road handling?
    And will it make much difference off road?
    Are disconnects worth it?
    Broad Rule of Thumb:-

    Front (anti) sway bars increase understeer, (going straight ahead on fast corners....)

    Rear bars increase oversteer. (spinning out on gentle corners...)

    Both reduce body roll, and increase the effective spring-rate on the compressed side ,- the side on the outside of the turn.

    In the real world, its a matter of balance between the two ends, with a nod towards comfort and the desired end result. Also changes a bit as to whether the car is RWD or FWD or AWD

    Golden Rule is to 'not' overdo it.

    From memory, early RR Classics had neither, (?) and rolled like a drunken sailor in the driveway, but were fantastic off-road.

    Disconnects ? - Dunno, depends on how expensive and how much a differance off-road, is the lack of a sway bar

  9. #9
    Join Date
    Jan 2010
    Location
    Newman WA
    Posts
    889
    Total Downloaded
    0
    Superquag, the drunken sailor sensation wasnt due to the lack of sway bars , more like the combination of spring rates and shocker rates,it was easily overcome with a set of decent shockers , Bilstien,Koni,de-Carbon etc etc.

  10. #10
    Join Date
    Jan 1970
    Location
    Avoca Beach
    Posts
    14,152
    Total Downloaded
    0
    If the car has after market springs and/or is lifted , then the handling balance will be upset anyway.
    Most people put heavier springs in the back which will increase the roll stiffness probably as much as the sway bar.
    I found my RRC with 160 lb front and 180 Lb back and a 2inch became too "tailly" with both bars and was better to drive with only the front.

    I also took the front off for my Cape york trip and yes it leans on roundabouts and you have to be smooth , but otherwise is not that much different.
    The sway bars were fitted for the yanks who didn't like the lean as they hooked onto the freeway on ramps but IMHO the car is very acceptable to drive without them. But then I keep the weight low and if you like to overload a roofrack then it will feel better, but will still tip over.
    Regards Philip A.

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!