I should also add its manual, transfer case question is prob stupid as its probebly what I have on there ATM. But diff locks, what else needs doing to make them reliable?
I all, I'm very new to the 4x4 scene and hope to make it a fun weekend hobby, I have a disco1 3.9 V8i and am wanting to build it up to keep up with the others. My question is what's the advantages of a lt230 locking transfer case? Is it a straight bolt up to disco1 and how hard is it to put diff locks in? Cheers in advance.
Mic
I should also add its manual, transfer case question is prob stupid as its probebly what I have on there ATM. But diff locks, what else needs doing to make them reliable?
The advantage of locking the centre diff lock is it gives 50% drive to both front and rear axles. With it unlocked all the power will go the the axle of least resistance.
Yours being a D1 it already has the centre diff lock installed. You just push the little lever to the left and a yellow light comes up on the dash.
If your refering to Diff locks then that a whole other topic that a search will help you with.
Cheers, David.
My Land Rover has made me a better Mechanic........
D2 TD5 Manual, CDL, Detroit Rear, Truetac Front, 2" OME lift, 32" MT Tyres, ARB Bull Bar, Winch, TJM Roof Rack, Driving Lights, Dual Batteries, ARB Side Steps, Rear Draws, Uhf.
Thanks bud, I've searched and searched bout diff lockers and have found opinions on brands etc, but can find nothing on fitting hints or difficulties? That's handy to know bout transfer lock, thanks again
No hints required, you either have them or you dont, personally a winch first would be a better option. Lots of posts about the different locker options which is only limited by $$$$ .
MY08 TDV6 SE D3- permagrin ooh yeah
2004 Jayco Freedom tin tent
1998 Triumph Daytona T595
1974 VW Kombi bus
1958 Holden FC special sedan
If you're extremely new to the 4x4 experience, I don't think you need front and rear diff lockers. Use the centre diff lock you already have for sure, but chances are if you're heading into terrain that requires a front and back locker with little to no experience, you're going to have much bigger problems that not having lockers.
I wouldn't say I'm an expert, but I've done my fair share of 4x4'ing now and I don't have either front or back lockers and I'm still not that worried about getting them either. There is SO much to experience before you need to seriously consider getting front or rear lockers. And SO much other gear I would buy first.
That's my 2 cents.
To answer your original question - what is the advantage of the transfer (centre diff) locker: It's particularly useful going up a steep hill. In this case, all the weight will be on the rear wheels and the front wheels will receive all the power and start spinning. Lock the transfer box and you get 50/50 power front/rear regardless of weight or traction.
This can also be useful on any slippery surface where you're likely to encounter wheel spin on either front or back for the same reasons I've just mentioned.
Just never engage the lock on tarmac.
Thanks heaps guys, defiantly giving me plenty to consider and think about (no lock on Tarmac is good to know) ill be going up to the watagan state forest on Saturday so I Spode this center lock will come into action![]()
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks