2 door conversion!

Quote:

---

Originally Posted by sheerluck

You might be right. Because converting a 4 door Disco to a 2 door Disco is "thinking outside the box".

Or a pointless waste of time, depending on your point of view.

---

It is pointless, be more useful to cut it into a ute and put a canopy on it, otherwise the doors arent exactly an inconvenience on a panel van type body...

I stand by my original suggestion of putting a 2 door body on, he wants to source the panels anyway so why **** around chopping two bodies up, could even sell the 4 door body and do it really cheaply!!!

But it sounds like all froogle wants is a yes to his crackpot idea, so YES, go for it, I'll buy the chassis when you've ****ed the body up and make a comp truck. :p

Just weld the rear doors shut..... done.

Jeez you people! :D

Oh.... and spray over the weld. :(

Quote:

---

Originally Posted by Slunnie

Just weld the rear doors shut..... done.

Jeez you people! :D

---

That's not Land Rover enough!
Drill a few holes in each side and cable tie them together!
Duct tape over the gaps, but not straight or evenly spaced, so you don't lose that "From factory" look. :Rolling:
Go ahead and do it Fooogle. Do whatever you like :)

Quote:

---

Originally Posted by Disco Muppet

........Go ahead and do it Froogle. Do whatever you like :)

---

Jeez Muppet, at least get his name right! It's Fooooooooooogle. Right?

Quote:

---

Originally Posted by sheerluck

Jeez Muppet, at least get his name right! It's Fooooooooooogle. Right?

---

I have no idea what you're talking about Dave....:angel: :wasntme:

Quote:

---

Originally Posted by Disco Muppet

I have no idea what you're talking about Dave....:angel: :wasntme:

---

Not that it matters anyway, you could have called him Rita for all I care!

And I think he's gone never to return.....

Quote:

---

Originally Posted by Disco Muppet

That's not Land Rover enough!
Drill a few holes in each side and cable tie them together!
Duct tape over the gaps, but not straight or evenly spaced, so you don't lose that "From factory" look. :Rolling:
Go ahead and do it Fooogle. Do whatever you like :)

---

I think to do it "Land Rover enough" you would definitely need exposed rivet heads.

Quote:

---

Originally Posted by BigJon

I think to do it "Land Rover enough" you would definitely need exposed rivet heads.

---

Good point.
Don't forget to maintain the Lucas electrics though, can't go wrong with them

Quote:

---

Originally Posted by BigJon

I think to do it "Land Rover enough" you would definitely need exposed rivet heads.

---

I was thinking the along the same lines, along with predented panels, but I thought it may have been a bit "Defender". But being a Discovery, Im not sure if LR would rivet the door shut, perhaps they'd just fit a great big rubber seal like those around the windows, take the door handles off and market it as a 3dr.