Results 1 to 5 of 5

Thread: Cargo area dimensions for expedition box build up

  1. #1
    Join Date
    Oct 2012
    Location
    Indonesia
    Posts
    120
    Total Downloaded
    0

    Cargo area dimensions for expedition box build up

    Do you know what are the cargo dimensions for Disco 1? I am trying to buy 30inch box (two of them) and I am not sure it it will fit. I want to put them side by side, so I need at least 30 inches lengthwise, (front to back).

    I am on vacation and don't have the access to the car )

  2. #2
    Join Date
    Dec 2008
    Location
    Geelong
    Posts
    553
    Total Downloaded
    0
    Just had a look. The narrowest point between in the rear door opening is 1190mm (46.85inch). Between the wheel arches inside is 1080mm (42.5inch). Front to back, with the back seat in place you have 620mm (24.4inch) between it and the back door at the top of the seat. The only way you will fit the 30inch boxes is with the seats down. Simon

  3. #3
    Join Date
    Oct 2012
    Location
    Ingleburn Sydney NSW
    Posts
    146
    Total Downloaded
    0
    Quote Originally Posted by mogindo View Post
    Do you know what are the cargo dimensions for Disco 1? I am trying to buy 30inch box (two of them) and I am not sure it it will fit. I want to put them side by side, so I need at least 30 inches lengthwise, (front to back).

    I am on vacation and don't have the access to the car )
    Just done a quick check

    1/ With the rear seats folded completly forward 53"
    2/ With the backs of the rear seats folded 28"
    3/ With the rear seats in normal position, from floor to rear door 33 1/2"
    4/ With the rear seats in normal position, I put a milk crate in the back which is 12" high, from this height to the rear door shutting normally 29"

    Regards
    Rich

  4. #4
    Join Date
    Oct 2012
    Location
    Indonesia
    Posts
    120
    Total Downloaded
    0
    Thanks Mates this helps a lot.
    Especially the note about the incline of the back seat.
    The box I was looking at is 30 inch long and 19 inches tall, so I guess it will not fit (just). Here is the link to the product. I am set to buy (a roller) a box with big set wheels so I can roll from the house to the truck and then roll it on to the site.
    They are both made to be builder's tool boxes, so tough built and don't cost a fortune.
    30.5L x 19W X 19H
    Shop Task Force 30-1/2-in Black Plastic Tool Box at Lowes.com

    Another option is, this one is 24 inches long (14W x 16H), so it will go with room to spare and if I keep my rear door pocket (whatever that thing is called) it could be a good fit. Its quite smaller that then one above.

    Pro Mobile Tool Box-033026R at The Home Depot

    I also must tell you that my wife jaw dropped when I told her that I asked some guys on the internet for the dimensions for the truck and I got it few hours later )) LR ALL THE WAY! Thanks again!

  5. #5
    Join Date
    Oct 2012
    Location
    Ingleburn Sydney NSW
    Posts
    146
    Total Downloaded
    0
    Quote Originally Posted by mogindo View Post
    I also must tell you that my wife jaw dropped when I told her that I asked some guys on the internet for the dimensions for the truck and I got it few hours later )) LR ALL THE WAY! Thanks again!
    Just be careful she does not leave you for the Land Rover and us, now she knows how quick we respond .

    ps; pleased we could help .

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!