Page 1 of 2 12 LastLast
Results 1 to 10 of 15

Thread: Wheel donors and roof racks

  1. #1
    Join Date
    Dec 2013
    Location
    Melbourne
    Posts
    314
    Total Downloaded
    0

    Wheel donors and roof racks

    Two different subjects, but no need to open too many posts!!!

    1. Is there any other car (toyota hilux or similar) that has 5 stud wheels that can fit on discovery 1? except defenders and classics ofcourse!!!

    2. Why are all discovery roof racks positioned so far from the roof? Every one I've seen has about 10 cm from the roof to the bottom of the rack regardless if it's flat or follows the roof slope? Discovery already has that higher part of the roof at the rear, why so much gap?

    3. Every discovery that I've seen that has only half roof rack has it positioned all the way at the rear. Why not at the front? Roof is lower at the front, and weight distribution is better!!!

    Being new to Discovery, I'm just wondering about this stuff.

    Thanx for the patience!!

  2. #2
    Join Date
    May 2008
    Location
    Bundaberg Qld
    Posts
    7,036
    Total Downloaded
    0
    Disco 1, RRC, Defender and Series all run the same stud pattern. No others that I can recall.

    HTH

  3. #3
    Join Date
    Jan 1970
    Location
    St Helena,Melbourne
    Posts
    16,806
    Total Downloaded
    1.13 MB
    Access is better for a half rack mounted at the rear, as pop058 has already mentioned you are limited to either original or aftermarket landrover rims as nothing else suitable will fit.
    MY08 TDV6 SE D3- permagrin ooh yeah
    2004 Jayco Freedom tin tent
    1998 Triumph Daytona T595
    1974 VW Kombi bus
    1958 Holden FC special sedan

  4. #4
    Join Date
    Jan 1970
    Location
    Normanhurst, NSW
    Posts
    10,258
    Total Downloaded
    0
    I had a set of widened FJ Holden rims that I ran on a Series II SWB on Fraser Is in 1970. Worked quite well on Fraser with 15" tyres off Fairfax's Rolls Royce.

    The FJ had same stud pattern as Disco I, Series Landys etc but not really suitable (or legal) for the Disco.
    Roger


  5. #5
    Join Date
    Jan 2008
    Location
    Pialba, Qld (near Hervey Bay)
    Posts
    288
    Total Downloaded
    0

    Talking

    Ford Explorers have a 5 stud pattern, don't know if the same but

  6. #6
    Join Date
    Jan 1970
    Location
    St Helena,Melbourne
    Posts
    16,806
    Total Downloaded
    1.13 MB
    Quote Originally Posted by steelo View Post
    Ford Explorers have a 5 stud pattern, don't know if the same but
    Not the same, transit is the only ford with the same PCD as a landy.
    MY08 TDV6 SE D3- permagrin ooh yeah
    2004 Jayco Freedom tin tent
    1998 Triumph Daytona T595
    1974 VW Kombi bus
    1958 Holden FC special sedan

  7. #7
    Join Date
    Jan 1970
    Location
    St Helena,Melbourne
    Posts
    16,806
    Total Downloaded
    1.13 MB
    Quote Originally Posted by Xtreme View Post
    I had a set of widened FJ Holden rims that I ran on a Series II SWB on Fraser Is in 1970. Worked quite well on Fraser with 15" tyres off Fairfax's Rolls Royce.

    The FJ had same stud pattern as Disco I, Series Landys etc but not really suitable (or legal) for the Disco.
    Well if you want to go vintage, 21" steel rims off a 1925 Dodge 4 fit.
    MY08 TDV6 SE D3- permagrin ooh yeah
    2004 Jayco Freedom tin tent
    1998 Triumph Daytona T595
    1974 VW Kombi bus
    1958 Holden FC special sedan

  8. #8
    Join Date
    Mar 2012
    Location
    Armstrong Creek, Qld
    Posts
    8,800
    Total Downloaded
    0
    Our '85 & '89 Rangie wheels fitted on our D1 but not vice versa because of the hub diameter.
    Steve
    Umm just read the original post again & my info is meaningless, sorry!

  9. #9
    Join Date
    Jan 1970
    Location
    St Helena,Melbourne
    Posts
    16,806
    Total Downloaded
    1.13 MB
    Quote Originally Posted by Saitch View Post
    Our '85 & '89 Rangie wheels fitted on our D1 but not vice versa because of the hub diameter.
    Steve
    Umm just read the original post again & my info is meaningless, sorry!
    They will fit you just need to grind a little off the hubs (like 1-1.5mm) , i had D1 steel rims on both my 81 2dr and 85 4dr rangie's.
    MY08 TDV6 SE D3- permagrin ooh yeah
    2004 Jayco Freedom tin tent
    1998 Triumph Daytona T595
    1974 VW Kombi bus
    1958 Holden FC special sedan

  10. #10
    Join Date
    Dec 2013
    Location
    Melbourne
    Posts
    314
    Total Downloaded
    0
    So the conclusion is some range rover od after market!

    Sent from my GT-I9300 using AULRO mobile app

Page 1 of 2 12 LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!