Results 1 to 5 of 5

Thread: D1 cutting out

  1. 23rd February 2014, 02:44 PM #1
    Jungney Guest

    D1 cutting out

    Both batteries are fully charged but there is no power going through to the fuse box and therefore also to the ignition. It has done this twice in the last two days, running for about 15 secs, but then cutting out. The first time it started again after a minute, the second it started after an hour but this time there is just no power.

    There is a red flashing LED at driver's side which appears to suggest an immobilizer of some sort but my manual for this model doesn't mention an alarm or an immobilizer. I'm therefore guessing that it is after market. Any good information on that?

    Assuming it is an immobilizer issue, I'd be happy to bypass it completely. Are there any standout issues in having this done?

    Cheers.
    Reply With Quote Reply With Quote
  2. 23rd February 2014, 04:03 PM #2
    Uglitom's Avatar
    Uglitom
    Uglitom is offline Fossicker
    Join Date
    Apr 2009
    Posts
    61
    Total Downloaded
    0
    Do you have a key fob with push buttons? If so
    How many buttons? Also how are you running your dual batteries? The older diode set ups can isolate both batteries from the system if they fail.
    Reply With Quote Reply With Quote
  3. 23rd February 2014, 08:11 PM #3
    Scouse's Avatar
    Scouse
    Scouse is offline OldBushie Gold Subscriber
    Join Date
    Jan 1970
    Location
    Douglas Park, NSW
    Posts
    9,347
    Total Downloaded
    0
    From your other thread, you have a 1993 200tdi. These didn't have any security system from the factory so you have some sort of aftermarket kit fitted.


    If it's mucking up & you can't determine what brand it is to sort it out, remove it altogether & get it back to factory spec.
    Scott
    Reply With Quote Reply With Quote
  4. 24th February 2014, 11:18 AM #4
    Jungney Guest

    Thanks

    The beast is currently at the servo and the mechanic said exactly that he would restore it to standard before looking at any other issues. I had a look at the after market wiring and wasn't impressed.
    Reply With Quote Reply With Quote
  5. 24th February 2014, 08:59 PM #5
    loanrangie's Avatar
    loanrangie
    loanrangie is offline LordRover Subscriber
    Join Date
    Jan 1970
    Location
    St Helena,Melbourne
    Posts
    16,777
    Total Downloaded
    1.13 MB
    Run a wire directly from battery to inj pump solenoid and see if it keeps running.
    MY08 TDV6 SE D3- permagrin ooh yeah
    2004 Jayco Freedom tin tent
    1998 Triumph Daytona T595
    1974 VW Kombi bus
    1958 Holden FC special sedan
    Reply With Quote Reply With Quote
« Long Range LRA Tank - Fit in Disco 1 | Head light relays »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!