Only on some of the edc equipped Euro versions.
You don't need it, the governor keeps the engine at steady Rpms.
If the compressors not shifting enough refrigerant you can wind the low idle screw in a little to.lift the idle.
Mine doesn't have any idle up when aircon is turned on. Is this normal for them not to have it? Did anyone make anything and installed it themselves?
Thanx!!!
Only on some of the edc equipped Euro versions.
You don't need it, the governor keeps the engine at steady Rpms.
If the compressors not shifting enough refrigerant you can wind the low idle screw in a little to.lift the idle.
Dave
"In a Landrover the other vehicle is your crumple zone."
For spelling call Rogets, for mechanicing call me.
Fozzy, 2.25D SIII Ex DCA Ute
TdiautoManual d1 (gave it to the Mupion)
Archaeoptersix 1990 6x6 dual cab(This things staying)
If you've benefited from one or more of my posts please remember, your taxes paid for my skill sets, I'm just trying to make sure you get your monies worth.
If you think you're in front on the deal, pay it forwards.
Thanx for the advice!!! Governor SHOULD keep steady RPMs, mine still drops a little : ) It's a no biggie, but would like to make it work properly!!!
Thanx again!!
Old age tends to do that to things that work on spring balance.
Dave
"In a Landrover the other vehicle is your crumple zone."
For spelling call Rogets, for mechanicing call me.
Fozzy, 2.25D SIII Ex DCA Ute
TdiautoManual d1 (gave it to the Mupion)
Archaeoptersix 1990 6x6 dual cab(This things staying)
If you've benefited from one or more of my posts please remember, your taxes paid for my skill sets, I'm just trying to make sure you get your monies worth.
If you think you're in front on the deal, pay it forwards.
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks