Thread: 1993 Discovery 1 Pre update Dual Brake lines

Because folk like to over complicate things if you are happy with how it stops with the system is has go that way. If it had a single line system I would say definitely fit the vented gear as its so easy to do with that system.

yes i am happy with how it stops, i'm not about changing to vented brakes, my main thing was the 24 spline axles and diff's, as i have a set of lockers but cannot use them on the current 10 spline setup, if worse comes to worse i guess i could just swap over the internals but that defeats the purpose of taking my time completely rebuilding on the bench, which is what t i wanted to do in the first place. then just do a complete swap.

what i will do is find a set of dual line calipers and test fit them with solid discs first and take it from there.

I think it will all fall in to place

You know that splitting the calipers is all of four bolts each and around 20 minutes per side? But hey, solid discs are fine, venteds are better at cooling but worse for catching gravel. Swings and roundabouts.

i would have no problem splitting the calipers if i could find somewhere to buy the kit from, i have searched everywhere, cant even find any reference to it online

Originally Posted by Kevin B

i would have no problem splitting the calipers if i could find somewhere to buy the kit from, i have searched everywhere, cant even find any reference to it online

Try ringing Triumph Rover Spares, 08 8384 6933 and see if they still sell them.

OK called TRS, was advised Solid discs will not fit later model only ventilated, trying to make them fit would be a nightmare, told the gentleman on the phone why i wanted to do this conversion to Fit Diff locks to a 24 spline and he almost jumped through the phone trying to tell me never fit Lockers to front axle, don't know why really as many have done this in the past with no issues, that aside though its not to bad a price for the spacers alone.

here is the prices

Spacer kit to do whole care I.E 4 Calipers - $148.00
Discs - $65 ea
Pads $75 set
Pin Kit - $19

Total - $ 727 to do whole care

Although i would research the pads and discs from elsewhere to see if a better Price was available

Did they go in to any detail why they don't fit? Seems odd seeing how easy it is to convert from solid to vented using defender parts but both single line. Take no notice of not using lockers been useing my front arb for years no problems just use a little sense