Page 1 of 2 12 LastLast
Results 1 to 10 of 14

Thread: '96 Disco Auto won't start in Park but will in Neutral

  1. 21st September 2014, 08:19 PM #1
    Robmacca's Avatar
    Robmacca
    Robmacca is offline Wizard
    Join Date
    Jun 2013
    Location
    Warner Area - SEQ
    Posts
    1,924
    Total Downloaded
    0

    Question '96 Disco Auto won't start in Park but will in Neutral

    Guys....

    Just having an issue with starting my D1 Auto. It won't start in Park but will start in Neutral. I had a bit of a look in the manual and it seems it might be related to the "Start Inhibit / Reverse Light Switch".

    Has anybody else had this issue and if so, what's the solution? A New switch or can u remove and clean it or is it possibly a bad electrical connection??

    Haven't had a chance to get under yet to look more closely, hopefully on my next day off....

    Rob
    Reply With Quote Reply With Quote
  2. 22nd September 2014, 06:55 AM #2
    mike123's Avatar
    mike123
    mike123 is offline Master
    Join Date
    Aug 2012
    Location
    North west Sydney
    Posts
    201
    Total Downloaded
    0
    G'day Rob,

    I haven't had the problem on my auto in the Disco but many years ago working on a Holden auto I had to fiddle with (adjust) the selection lever/switch to get it to start in either P or N. From memory the N gate was longer than the P gate and so you could get it to start in N but it wouldn't quite engage in P. I'd check the linkages to make sure nothing has slipped and then the selector lever.

    Sorry I can't be of more help.
    Reply With Quote Reply With Quote
  3. 22nd September 2014, 07:26 AM #3
    Scouse's Avatar
    Scouse
    Scouse is offline OldBushie Gold Subscriber
    Join Date
    Jan 1970
    Location
    Douglas Park, NSW
    Posts
    9,347
    Total Downloaded
    0
    Remove the gear indicator cover & make sure a coin or something else is preventing Park from fully engaging.
    Scott
    Reply With Quote Reply With Quote
  4. 22nd September 2014, 09:03 AM #4
    Robmacca's Avatar
    Robmacca
    Robmacca is offline Wizard
    Join Date
    Jun 2013
    Location
    Warner Area - SEQ
    Posts
    1,924
    Total Downloaded
    0

    Question

    Thanks guys.... I'll try that when I get a chance....

    Upon reading the Manual, it seems the "Start Inhibit / Reverse Light Switch" is one unit, so I would assume the Reverse Lights should be playing up if it was this switch.... but the reverse lights are working fine..... So, I'll have a look at the lever / linkages...

    I guess its fairly easy to gain access to both of these?

    rob
    Reply With Quote Reply With Quote
  5. 22nd September 2014, 09:15 AM #5
    incisor's Avatar
    incisor
    incisor is offline SysAdmin (Owner) Vendor
    Join Date
    Apr 2002
    Location
    Godwin Beach 4511
    Posts
    20,689
    Total Downloaded
    32.38 MB
    Quote Originally Posted by Robmacca View Post
    Thanks guys.... I'll try that when I get a chance....

    Upon reading the Manual, it seems the "Start Inhibit / Reverse Light Switch" is one unit, so I would assume the Reverse Lights should be playing up if it was this switch.... but the reverse lights are working fine..... So, I'll have a look at the lever / linkages...

    I guess its fairly easy to gain access to both of these?

    rob
    they are a bitch

    on the passenger side of the gearbox about halfway up the box towards the front of it you will see the lead and connector..

    not much fun the last one i did...
    2007 Discovery 3 SE7 TDV6 2.7
    2012 SZ Territory TX 2.7 TDCi

    "Make the lie big, make it simple, keep saying it, and eventually they will believe it." -- a warning from Adolf Hitler
    "If you don't have a sense of humour, you probably don't have any sense at all!" -- a wise observation by someone else
    'If everyone colludes in believing that war is the norm, nobody will recognize the imperative of peace." -- Anne Deveson
    “What you leave behind is not what is engraved in stone monuments, but what is woven into the lives of others.” - Pericles
    "We can ignore reality, but we cannot ignore the consequences of ignoring reality.” – Ayn Rand
    "The happiness of your life depends upon the quality of your thoughts." Marcus Aurelius
    Reply With Quote Reply With Quote
  6. 25th September 2014, 11:29 AM #6
    Robmacca's Avatar
    Robmacca
    Robmacca is offline Wizard
    Join Date
    Jun 2013
    Location
    Warner Area - SEQ
    Posts
    1,924
    Total Downloaded
    0
    Guys....

    Would this Park/Neutral Position Switch on the Side of the Auto be my issue with it not starting in "P" but still starting in "N" (see attached pic) ??

    rob
    Attached Images Attached Images
    Reply With Quote Reply With Quote
  7. 25th September 2014, 11:36 AM #7
    loanrangie's Avatar
    loanrangie
    loanrangie is online now LordRover Subscriber
    Join Date
    Jan 1970
    Location
    St Helena,Melbourne
    Posts
    16,777
    Total Downloaded
    1.13 MB
    Does the pawl engage correctly in park, if not you may just need to adjust the cable on the selector.
    You wont have EDC so not sure if that diagram is correct for your vehicle.
    MY08 TDV6 SE D3- permagrin ooh yeah
    2004 Jayco Freedom tin tent
    1998 Triumph Daytona T595
    1974 VW Kombi bus
    1958 Holden FC special sedan
    Reply With Quote Reply With Quote
  8. 25th September 2014, 12:41 PM #8
    Robmacca's Avatar
    Robmacca
    Robmacca is offline Wizard
    Join Date
    Jun 2013
    Location
    Warner Area - SEQ
    Posts
    1,924
    Total Downloaded
    0
    Quote Originally Posted by loanrangie View Post
    Does the pawl engage correctly in park, if not you may just need to adjust the cable on the selector.
    You wont have EDC so not sure if that diagram is correct for your vehicle.
    Yes, it does seem to engage properly in "P". (ie. it locks into place and the car cannot roll anywhere)
    Reply With Quote Reply With Quote
  9. 25th September 2014, 12:43 PM #9
    Robmacca's Avatar
    Robmacca
    Robmacca is offline Wizard
    Join Date
    Jun 2013
    Location
    Warner Area - SEQ
    Posts
    1,924
    Total Downloaded
    0
    Quote Originally Posted by loanrangie View Post
    Does the pawl engage correctly in park, if not you may just need to adjust the cable on the selector.
    You wont have EDC so not sure if that diagram is correct for your vehicle.

    Yeah, sorry about that, but that part is the same with or w/o anyhow...
    Reply With Quote Reply With Quote
  10. 25th September 2014, 01:47 PM #10
    Robmacca's Avatar
    Robmacca
    Robmacca is offline Wizard
    Join Date
    Jun 2013
    Location
    Warner Area - SEQ
    Posts
    1,924
    Total Downloaded
    0
    Quote Originally Posted by loanrangie View Post
    Does the pawl engage correctly in park, if not you may just need to adjust the cable on the selector.
    You wont have EDC so not sure if that diagram is correct for your vehicle.
    Well stuff me..... Just got home work and I go to put it Park on the drive way to get out to check the mailbox and the car started rolling away... Won't go in Park. To adjust this cable, do I need to remove the centre console, etc or is it under the Car on the Auto?
    Reply With Quote Reply With Quote
Page 1 of 2 12 LastLast
« suspected fuel issue diagnosed by mechanic as faulty coil? | fuel inertia switch location »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!