It is just a seal, but you might be better off installing a whole seal kit. While you have it apart.
Assuming of course, that the hose entry points are OK.
![]()
Hello all,
My disco is leaking rather profusely from the power steering box straight onto the pitman arm. Is it a seal you can replace or do I need to put a kit through the box? Any assistance would be greatly appreciated.
Dave
It is just a seal, but you might be better off installing a whole seal kit. While you have it apart.
Assuming of course, that the hose entry points are OK.
![]()
Too easy, thanks![]()
If its just the lower seal, you can do it in there, tho it is easier with the box on the bench. Getting the pitman arm off is sometimes the hardest part. Last one I did required puller + oxy to budge it.
I need to do mine also, been putting it off for some time but in my case its both the steering arm seal and the pitman arm, so ill have to remove.
Carlos
1994 Land Rover Discovery 300tdi
1963 Land Rover Series 2a 88
Youtube Channel: https://www.youtube.com/channel/UCu3...BtsNIuTyGkAo5w
Instagram: https://instagram.com/rover_tasmania/
Rob - I have been ignoring it :P
But still have to do at some stage, cant avoid it for ever.
Carlos
1994 Land Rover Discovery 300tdi
1963 Land Rover Series 2a 88
Youtube Channel: https://www.youtube.com/channel/UCu3...BtsNIuTyGkAo5w
Instagram: https://instagram.com/rover_tasmania/
I think I ran some seal recon stuff, Moreys? in the D1,, I never replaced the seal so it must have worked![]()
"How long since you've visited The Good Oil?"
'93 V8 Rossi
'97 to '07. sold.![]()
'01 V8 D2
'06 to 10. written off.
'03 4.6 V8 HSE D2a with Tornado ECM
'10 to '21
'16.5 RRS SDV8
'21 to Infinity and Beyond!
1988 Isuzu Bus. V10 15L NA Diesel
Home is where you park it..
[IMG][/IMG]
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks