One of the injector washers is stuck to the head. Any ideas how to get it out?
Dave.
I was asked " Is it ignorance or apathy?" I replied "I don't know and I don't care."
1983 RR gone (wish I kept it)
1996 TDI ES.
2003 TD5 HSE
1987 Isuzu County
I usually use a scribe or seal hook.
occasionally to loosen them up I'll put a long shank screwdriver down and very very gently tap the handle with a small hammer as I twist it.
I have once used a pin punch to flatten a section of the washer enough to make it poke over the inside of the nozzle hole so I could hook it with the scribe.
letting it sit over night with a mix of 4:1 atf/diesel will help loosen any carbon deposits that are holding it. (i poke a cotton ball into the hole before squirting a teaspoon or 2 of the oil in.)
Dave
"In a Landrover the other vehicle is your crumple zone."
For spelling call Rogets, for mechanicing call me.
Fozzy, 2.25D SIII Ex DCA Ute
TdiautoManual d1 (gave it to the Mupion)
Archaeoptersix 1990 6x6 dual cab(This things staying)
If you've benefited from one or more of my posts please remember, your taxes paid for my skill sets, I'm just trying to make sure you get your monies worth.
If you think you're in front on the deal, pay it forwards.
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks