Thread: Does a 95 discovey cluster fit in 93?

Originally Posted by 87County

be aware that you may need to grind a 32mm open end spanner to reduce the o/a thickness to enable it to fit - surely cheaper and easier to buy a specific (thin) fan hub spanner in 32mm - most proper tool & bearing shops would carry them. Handy item to carry in your tool kit in case you ever need to do anything regarding removal/replacement of the belt.

VISCOUS FAN CLUTCH HUB OFFSET SPANNER 32mm OPEN END Suit FORD + OTHERS NEW | eBay

Didn't have to do any grinding it fit perfectly

Originally Posted by lars04

Are you talking about the clutch fan? I just went to Supercheap auto and grabbed a 32mm spanner worked a treat!

Got the spanner it's the viscous fan Hub tool that holds the hub while you crack the fan thread with the 32mm spanner so the hub doesn't spin when you try to undo the fan.

I hope that made sense

I will take photos and post them so you can see what's done but it won't be for about a month

Originally Posted by blitz

Got the spanner it's the viscous fan Hub tool that holds the hub while you crack the fan thread with the 32mm spanner so the hub doesn't spin when you try to undo the fan.

I hope that made sense

Ohhhhh I used the claw side of my hammer lol bit dodgy but worked can chuck up a picture tomorrow where I positioned it.

Originally Posted by lars04

Ohhhhh I used the claw side of my hammer lol bit dodgy but worked can chuck up a picture tomorrow where I positioned it.

Tried that and screwdrivers jammed in there nothing working as it's frozen on

Originally Posted by blitz

Tried that and screwdrivers jammed in there nothing working as it's frozen on

This could work.

Benz & BMW Fan Service Clutch Holder Wrench Set | Buy Tools & Equipment