steel rim offset

16 x 8 -25 Dynamic steelies on mine.

Quote:

---

Originally Posted by Boxer

16 x 8 -25 Dynamic steelies on mine.

---

How much did your rims set you back Boxer?

Quote:

---

Originally Posted by Boxer

16 x 8 -25 Dynamic steelies on mine.

---

Digging up and old thread, but i would also like to know what they were worth, and where you got them, -25 is that 55mm extra each side?
Anyone know what the standard offset is??

around 130mm backspace cal!

cheers phil

Quote:

---

Originally Posted by long stroke

Yep some 15x7" sunnies will do the trick just fine:)
We had a set on the disco for a while (31/10.5/15" cooper stt's)
All we had to do was give the rear guard a slight trim, no problems up front;)
Here's a pic...

https://www.aulro.com/afvb/images/im...09/09/1202.jpg

CHEERS TIM.

---

just saw you have 15s on a disco, do you know if a defender 15" will fit on a disco ? thanks, ps nice wheels, :)

Quote:

---

Originally Posted by cal415

Anyone know what the standard offset is??

---

See my reply on the first page! 33mm for standard rims.

Quote:

---

Originally Posted by p38arover

Ah. I didn't realise that off-road vehicles with beam axles were allowed 50mm increase in track. That's good. Thanks for that info.

Quote:

---

I wonder if it's the same in NSW. Quite probably.

---

---

25mm in NSW

Quote:

---

Originally Posted by dullbird

25mm in NSW

---

Just to clarify, does that mean that you can only increase track by 12.5mm each side

Quote:

---

Originally Posted by Crackerjack

Just to clarify, does that mean that you can only increase track by 12.5mm each side

---

I believe so (legally) but I would have to double check that...I did send a message to the engineer to check it but he hasn't got back to me.

So dont quote me on it......perhaps Slunnie might know he is pretty up on these sorts of things

Old thread but rather than starting a new one....

I have old 15 inch sunnies on my D1 because the tyres ( 31x10.5) are so much cheaper for the size and well, they just work well with the car.
But they are looking tired and I want to update but keep exactly the same diameter and offset. Im also in the market for new tyres shortly so maybe I will do rim/tyre together.

Stamped on the inside of the rim is "7JX15 02 6 YF" (Made in Taiwan) They are about 14 years old.

So is the 26 referring to the offset?

thanks