body lift d1

Im doing a 50mm lift this sunday with 2_door and Timaus13 :) :)

What I had to do is buy (yet to pay JC) a steering arm component to extend the arm with the lift. So make sure you have enough steering arm length or else you may find yourself without steering!!

Quote:

---

Originally Posted by stooge

Im doing a 50mm lift this sunday with 2_door and Timaus13 :) :)

What I had to do is buy (yet to pay JC) a steering arm component to extend the arm with the lift. So make sure you have enough steering arm length or else you may find yourself without steering!!

---

I've never had to yet, always undo all the bolts and wiggle enough out of it:o

Quote:

---

Originally Posted by Fusion

Hey Goldy . I have done the 30mm body lift and all that is required is the 10 blocks and longer HT bolts . You will need to drill 2 holes for the radiator support and drop the brackets down . 30mm doesn't seem much but it has stopped my wheels from rubbing on the guards . Oh and seat belt bolts just need adjusting if you have the longer bolts like mine has . I think the earlier D1's had a shorter seat belt bolt as V8Landy found out . :)

---

What about the load carriers under the rear cargo area and front seats, if you don;t pack these look forward to chassis cracks/ bending;)

Quote:

---

Originally Posted by rovercare

What about the load carriers under the rear cargo area and front seats, if you don;t pack these look forward to chassis cracks/ bending;)

---

What do you pack these with???. I haven't done mine either:o

Quote:

---

Originally Posted by V8Landy

What do you pack these with???. I haven't done mine either:o

---

Box section;)