Thread: body lift d1

Originally Posted by stooge

Im doing a 50mm lift this sunday with 2_door and Timaus13

What I had to do is buy (yet to pay JC) a steering arm component to extend the arm with the lift. So make sure you have enough steering arm length or else you may find yourself without steering!!

I've never had to yet, always undo all the bolts and wiggle enough out of it

Originally Posted by Fusion

Hey Goldy . I have done the 30mm body lift and all that is required is the 10 blocks and longer HT bolts . You will need to drill 2 holes for the radiator support and drop the brackets down . 30mm doesn't seem much but it has stopped my wheels from rubbing on the guards . Oh and seat belt bolts just need adjusting if you have the longer bolts like mine has . I think the earlier D1's had a shorter seat belt bolt as V8Landy found out .

What about the load carriers under the rear cargo area and front seats, if you don;t pack these look forward to chassis cracks/ bending

Originally Posted by rovercare

What about the load carriers under the rear cargo area and front seats, if you don;t pack these look forward to chassis cracks/ bending

What do you pack these with???. I haven't done mine either