Thread: MAF Cleaning

The inside of the MAF (on the 14CUX) has a port to the side. the port has 2 wires and as the air passes through the wires, heat, and voltage is created. The voltage tells the ECU the airflow. To clean the MAF, you can either take them apart or leave them together, but using non contact electrical cleaner will clean it. Just spray it over the whole MAF and make sure you are thorough when you spray around the wires. Its the wires that get covered in crap and need cleaning.

I bought some of this and have used it a couple of times. Works great IMO

Repair Accessories & Chemicals - Mass Air Flow Sensor Cleaner by CRC

Originally Posted by Boxer

I bought some of this and have used it a couple of times. Works great IMO

Repair Accessories & Chemicals - Mass Air Flow Sensor Cleaner by CRC

Boxer, did you source some locally or buy it from the states?

I just checked freight on that site and US$70.. to get a $6.50 can here is slightly out of the budget

Mark

Repco North Parramatta

Originally Posted by Bytemrk

Boxer, did you source some locally or buy it from the states?

I just checked freight on that site and US$70.. to get a $6.50 can here is slightly out of the budget

Mark

Here ya go from
CRC Industries (Aust) Pty Ltd.
9 Gladstone Road
Castle Hill, NSW
2154.
MAF Sensor Cleaner from CRC

Baz.

removed photo

Mike,

I think Ean's Disco is a TD5

Rgds
Pete

Originally Posted by Psimpson7

Mike,

I think Ean's Disco is a TD5

Rgds
Pete

I'm must be having a Cr**y day

Photo removed of V8 MAF

...