Reply With Quoteunless you can do it your self..the shop is a good option. the SS flex joints arnt cheap, around the $80 mark.
cheers phil
TopicToaster
SubscriberWhile doing an oil change tonight I noticed that the flex joint at the bottom of the pipe from the manifold is cracked about half way around its diameter. The braided stainless sleeve was already broken off in that area when I bought the car.
Do I just go to an exhaust place and get them to fit a new one, or is there a better alternative?
Steve
TopicToaster
unless you can do it your self..the shop is a good option. the SS flex joints arnt cheap, around the $80 mark.
cheers phil
TopicToaster
SubscriberThanks Phil - good to know what the joints are worth.
Guess I'll just take it in - might get them to take out the front muffler while I'm there.
Steve
SysAdmin (Owner)
thats what i did..
make a bit of a difference...
2007 Discovery 3 SE7 TDV6 2.7
2012 SZ Territory TX 2.7 TDCi
"Make the lie big, make it simple, keep saying it, and eventually they will believe it." -- a warning from Adolf Hitler
"If you don't have a sense of humour, you probably don't have any sense at all!" -- a wise observation by someone else
'If everyone colludes in believing that war is the norm, nobody will recognize the imperative of peace." -- Anne Deveson
“What you leave behind is not what is engraved in stone monuments, but what is woven into the lives of others.” - Pericles
"We can ignore reality, but we cannot ignore the consequences of ignoring reality.” – Ayn Rand
"The happiness of your life depends upon the quality of your thoughts." Marcus Aurelius
Wizard
SubscriberYou can also buy a straight pipe as fitted to the Defender. It may be a bit fiddly to fit but will get in place eventually. Waaay cheaper as the Disco part.
Johannes
There are people who spend all weekend cleaning the car.
And there are people who drive Discovery.
Posting Permissions
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks