Page 1 of 3 123 LastLast
Results 1 to 10 of 21

Thread: water spray on a 300tdi intercooler

  1. #1
    **Discovery300Tdi** Guest

    water spray on a 300tdi intercooler

    G'day,

    Was thinking about doing this for a while but dont know if it will be worth doing it if it dosent help. i was going to connect 2 extra hoses from the washer jets and have them near the intercooler so you can spray it down in hot weather or when out 4wdriven. either going to use existing switch inside which means i'll always wash my windscreen or put another switch just for the jet near the cooler. have heard stories of it working and stories that say it dosent make a real difference, has one here done something on the lines of this???

    cheers simo

  2. #2
    Join Date
    Aug 2008
    Location
    Perth
    Posts
    1,209
    Total Downloaded
    0
    No idea if it would be beneficial or not, but coincidentally Phoenix was looking into a car that had a water/air intercooler fitted: Help Phoenix buy a discovery!

  3. #3
    **Discovery300Tdi** Guest
    yeah like i said i have heared mixed stories..i saw that pic he had with the water/air cooler and geezz that looks messy as!!!!! the way i'm doing it is very simple just with some washer jets, i have seem them in the jap cars and they say it does help.

  4. #4
    dmdigital's Avatar
    dmdigital is offline OldBushie Vendor

    Gold Subscriber
    Join Date
    Jun 2006
    Location
    Arnhem Land, NT
    Posts
    8,492
    Total Downloaded
    0
    I suspect the benefits wouldn't necessarily be great. I can say from experience (and 4 turbo inter-cooled land rovers) that they perform a lot better in colder weather than in hotter weather. So cooling the air, increase the density, more oxygen is all good, but will a water spray be sufficient... don't know

    I think if it has a chance to work it would be better to have a larger intercooler in the D1 to start with.
    MY15 Discovery 4 SE SDV6

    Past: 97 D1 Tdi, 03 D2a Td5, 08 Kimberley Kamper, 08 Defender 110 TDCi, 99 Defender 110 300Tdi[/SIZE]

  5. #5
    **Discovery300Tdi** Guest
    Quote Originally Posted by dm_td5 View Post
    I suspect the benefits wouldn't necessarily be great. I can say from experience (and 4 turbo inter-cooled land rovers) that they perform a lot better in colder weather than in hotter weather. So cooling the air, increase the density, more oxygen is all good, but will a water spray be sufficient... don't know

    I think if it has a chance to work it would be better to have a larger intercooler in the D1 to start with.
    I am looking at getting a bigger intercooler for the D1 for about $550 if i recall and then was going to give it a burl to see if there is any difference but as you said it wouldnt be a huge difference made cause im only guessing with so little water spray coming from the jets.

  6. #6
    Join Date
    Nov 2007
    Location
    Central Coast NSW
    Posts
    72
    Total Downloaded
    0
    Its a common conversion with hotted up WRX cars.Spray onto intercooler 1 bottle to a fuel tank full. A falcon washer bottle for the washers.

  7. #7
    Join Date
    Feb 2008
    Location
    Ferntree Gully, Vic
    Posts
    1,814
    Total Downloaded
    0
    Hotted up cars like the Rex or Skylines usually use them when on full boost.It helps to keep the intake temperature down.I dont think it will really make much difference on a 300 Tdi.Unless your on full boost alot at the Otways

  8. #8
    Join Date
    Jan 1970
    Location
    VIC
    Posts
    3,536
    Total Downloaded
    0
    When I had my Mercedes diesel, water injection was very popular. Most systems sprayed water straight down the inlet manifold throat. I was always skeptical myself on account of going overboard and locking the thing

  9. #9
    Join Date
    Jun 2003
    Location
    Launceston, Tasmania
    Posts
    12,347
    Total Downloaded
    0
    waer injection and spray onto the intercooler are a little different I think.
    1994 Discovery TDi
    2004 Discovery 2 TD5
    2010 Discovery 4 TDV6
    1961, Series 2 Ambulance. 108-098 - Eden

    Registry of Ex Military Land Rovers Mem. 129
    Defence Transport Heritage Tasmania Member

  10. #10
    Join Date
    Mar 2007
    Location
    Perth WA
    Posts
    779
    Total Downloaded
    0
    I've your going to do it you need to do it properly otherwise you wont get the full benefit. A high pressure pump and some decent nozzles and a 50/50 mix of water and methanol will give you the greatest cooling effect.

    IMHO a pressure switch rigged up to set the sparys off once you reach max boost pressure is the way to go. You would be able to run a higher max boost pressure and keep your intake (and thusly egts) down in an acceptable range.

    Water to air intercooler kick arrss but they are a lot of work to set up.

    Luke

Page 1 of 3 123 LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!