Sluggish V8

right i seem to have got rid of problem, basically i checked all connections on plugs and dizzy, made sure no vacuum lines were split, i cleaned the little brass orifice in plastic T piece between rockers and plenum, cleaned little plunger unit at back of plenum, it now seems to be pulling like a warrior again :D

Thanks RoverV8 for you advice

Paul

Quote:

---

Originally Posted by It'sNotWorthComplaining!

I know nothing about the ZF autos, but do they have a Vacuum valve like some of the older transmissions. Because it seems to have similar symptoms as when the vacuum hose is detached from the actuator. BW35s and older Holden trannys had this.

---

Do you know where this vac valve is?

Quote:

---

Originally Posted by wolvespaul

All plugs, leads, rotor button etc are pretty new, .

---

What brand rotor?

Quote:

---

Originally Posted by roverv8

Do you know where this vac valve is?

---

I believe they run a kickdown cable rather than a vacuum modulator.

Quote:

---

Originally Posted by wolvespaul

right i seem to have got rid of problem, basically i checked all connections on plugs and dizzy, made sure no vacuum lines were split, i cleaned the little brass orifice in plastic T piece between rockers and plenum, cleaned little plunger unit at back of plenum, it now seems to be pulling like a warrior again :D

Thanks RoverV8 for you advice

Paul

---

Good, the vac advance unit is important, so at least you got it fixed!

All sorted, thanks for the info gentlemen.

I run a lucas rotor, went through 3 of the other rubbish i 4 months.

well so much for thinking my disco was back to normal, half way to work this evening and the ugly sluggishness and miss was back under load, but this time much worse, i could barely get up up any hill, and when i gave it throttle it coughed and spluttered, now at idle when giving it gas it misses like crazy at about 2700 to 3000 revs.
As posted by roverv8, how much vacuum should you get when holding finger over plenum when reving by hand, seems to be very little if you ask me.

Quote:

---

Originally Posted by wolvespaul

well so much for thinking my disco was back to normal, half way to work this evening and the ugly sluggishness and miss was back under load, but this time much worse, i could barely get up up any hill, and when i gave it throttle it coughed and spluttered, now at idle when giving it gas it misses like crazy at about 2700 to 3000 revs.
As posted by roverv8, how much vacuum should you get when holding finger over plenum when reving by hand, seems to be very little if you ask me.

---

As you said earlier, your plugs, leads, rotor are'nt that old

It could be the ignition amp playing up.

anyway of checking it out?
i have to get home to sydney in morning from the gong after work!!

Ive heard of people tipping cold water on the amp to cool it down and sometimes come good untill it heats up again