Results 1 to 7 of 7

Thread: Hand brake issues

  1. 17th January 2010, 05:53 PM #1
    big guy's Avatar
    big guy
    big guy is offline ChatterBox
    Join Date
    Apr 2007
    Location
    Prospect SA
    Posts
    2,131
    Total Downloaded
    0

    Hand brake issues

    Ever since I had a new clutch fitted I am finding my hand brake is getting effiecient.
    It now struggles to hold can on even a light incline and have to turn off and leave in gear and than it sometimes rolls on compression on a boat-ramp or so.
    Could there be fluid or something, on my past Landies the centre handbrake has always been best if not too good as it can be jerky but now I am struggling to get it to stop from rolling.
    The lever goes about 3/4 of way up and gets tight just no stopping power.

    Any ideas be very much appreciated.
    Reply With Quote Reply With Quote
  2. 17th January 2010, 06:14 PM #2
    justinc's Avatar
    justinc
    justinc is offline Swaggie Vendor
    Join Date
    Aug 2006
    Location
    Kingston, Tassie, OZ.
    Posts
    13,728
    Total Downloaded
    0
    I would check to see there is no oil on the shoes, sounds like that to me Leaking rear output seal isn't unusual

    JC
    The Isuzu 110. Solid and as dependable as a rock, coming soon with auto box😊
    The Range Rover L322 4.4.TTDV8 ....probably won't bother with the remap..😈
    Reply With Quote Reply With Quote
  3. 17th January 2010, 06:51 PM #3
    big guy's Avatar
    big guy
    big guy is offline ChatterBox
    Join Date
    Apr 2007
    Location
    Prospect SA
    Posts
    2,131
    Total Downloaded
    0
    Rear seal was done but might be leaking again. Bloody expensive to replace again.

    Hope its not that but no other fluid can really get to it!

    My mechanic is a bit hit and miss
    Reply With Quote Reply With Quote
  4. 17th January 2010, 07:08 PM #4
    justinc's Avatar
    justinc
    justinc is offline Swaggie Vendor
    Join Date
    Aug 2006
    Location
    Kingston, Tassie, OZ.
    Posts
    13,728
    Total Downloaded
    0
    By rear seal you mean rear transfer case output shaft seal? The seal is $27 genuine Corteco brand, even a complete flange kit is less than $150, and this consists of rear output flange, locknut, seal and felt shaft spline seal. Fitting is .5 to 1 hour tops.

    JC
    The Isuzu 110. Solid and as dependable as a rock, coming soon with auto box😊
    The Range Rover L322 4.4.TTDV8 ....probably won't bother with the remap..😈
    Reply With Quote Reply With Quote
  5. 17th January 2010, 07:38 PM #5
    big guy's Avatar
    big guy
    big guy is offline ChatterBox
    Join Date
    Apr 2007
    Location
    Prospect SA
    Posts
    2,131
    Total Downloaded
    0
    Hmm.
    I will have to check, maybe I misread on invoice, I know output shaft and rear main was done but now not sure what cost what.
    Better double check before I fly off the handle.
    Thanks.
    Reply With Quote Reply With Quote
  6. 19th January 2010, 09:50 AM #6
    martinozcmax's Avatar
    martinozcmax
    martinozcmax is offline Master
    Join Date
    Mar 2008
    Location
    Melbourne
    Posts
    572
    Total Downloaded
    0
    Quote Originally Posted by big guy View Post
    Hmm.
    I will have to check, maybe I misread on invoice, I know output shaft and rear main was done but now not sure what cost what.
    Better double check before I fly off the handle.
    Thanks.
    Had exactly the same prob. Oily shoes replaced, same prob three weeks later. Posted here for help.

    Someone recommended a sealant which is what my mechanic did after I took the post to him. Fixed it for less than $90 all up. Been fine for over a year now. Do a search on handbrake to find the original post maybe.

    Disco 200 Tdi 93.

    Good luck

    Martin
    Reply With Quote Reply With Quote
  7. 19th January 2010, 05:19 PM #7
    Blknight.aus's Avatar
    Blknight.aus
    Blknight.aus is online now RoverLord Vendor
    Join Date
    Aug 2006
    Location
    Melbourn(ish)
    Posts
    26,500
    Total Downloaded
    0
    it can also be a stretched cable.
    Dave

    "In a Landrover the other vehicle is your crumple zone."

    For spelling call Rogets, for mechanicing call me.

    Fozzy, 2.25D SIII Ex DCA Ute
    Tdi autoManual d1 (gave it to the Mupion)
    Archaeoptersix 1990 6x6 dual cab(This things staying)


    If you've benefited from one or more of my posts please remember, your taxes paid for my skill sets, I'm just trying to make sure you get your monies worth.
    If you think you're in front on the deal, pay it forwards.
    Reply With Quote Reply With Quote
« Radiator advice | Is anyone running a Dual timing A & R Power Amp on their LPG Disco? »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!