lifting a 2000 TD5 ( and other disco td5 questions )

Quote:

---

Originally Posted by jackerz

and has anyone got any ideas for a rear bumper?

mine is a bit damaged and maybe i will put something on instead

---

Do a search in a few areas on this forum for some ideas and answers.....plenty of past threads on custom rear bars, lift kits and lots of other changes you can make. Look under the Projects, Good Oil and Members Vehicles areas.
I'm not trying to fob you off, but there really is a wealth of ideas and info there and it will give you an opportunity to see just what can be done.....then all you need worry about is the costs:D

The "bars" issue you mentioned is probably removing the anti roll bars to get more flex and wheel travel etc but it will affect the vehicle's handling overall and some things need to be taken into account such as whether the car has ACE fitted. Exactly what you wish to use the car for has a bearing on what modifications to carry out.

Quote:

---

Originally Posted by midal

Do a search in a few areas on this forum for some ideas and answers.....plenty of past threads on custom rear bars, lift kits and lots of other changes you can make. Look under the Projects, Good Oil and Members Vehicles areas.
I'm not trying to fob you off, but there really is a wealth of ideas and info there and it will give you an opportunity to see just what can be done.....then all you need worry about is the costs:D

The "bars" issue you mentioned is probably removing the anti roll bars to get more flex and wheel travel etc but it will affect the vehicle's handling overall and some things need to be taken into account such as whether the car has ACE fitted. Exactly what you wish to use the car for has a bearing on what modifications to carry out.

---

yes i know there is lots of valuable information on here:)
ive searched a bit, and tried typing a new thread called 'rear bumpers' but not actually posting it, just seeing what ideas come up.
i have read so much in the past few days and it is all great information :)
with regards to suspension, there are so many threads and it has helped heaps! i just wanted some more specific info on prices and quality... i may have missed a thread somewhere that has all of this... i probably did as there are so many of them! as for rear bumper, i actually searched for it, but was unlucky and couldnt find anything... but i will have a better search through Projects, Good Oil and Members Vehicles areas.

as for removing bars, that sounds like what they were talking about. and i dont believe is has ACE, although i didnt really know too much about this, i pick it up today, so i can confirm, but i dont think it does.

I think alien d2 meant SWMBO, which stands for She Who Must Be Obeyed (from Rumpole of the Bailey tv show).

Quote:

---

Originally Posted by jackerz

oh, and sorry, im after flex, nice ride, and i tow a boat every so often

---

Fitting a Bar to the front as well?

Easiest, OME...

Good springs, well rated... Decent shocks for the $$$

220Lb fronts
300-340lb progressive rears..

Will do the job nicely allround with towing boat, decent flex, nice ride...

Dont pull your swaybars... The rear is fine, for real flex look at a disconnect for the front.

But my opinion, reasonable flex and TruTracs or Lockers will get you further, easier....

http://i536.photobucket.com/albums/f...0/IMG_6013.jpg
I see your in Perth, James at West Coast Suspension offers a good product and was very helpful fitting mine, price was good also.:D

I once sought advice here on shocks.... all I got was Bilstein Bilstein Bilstein....guess what.... they are fantastic! If you're going to lift it, just ask for extended shafts, they are the same price.

As for the 'Removing Bars' I think they might be talking about removal of the front crossmember which runs under the front drive shaft. I took mine off...and recently put it back on. This is a structural support for the chassis and will allow for unwanted chassis flex if removed (or so I've been told by someone who has spent more time under Landies than just about anyone I know). I had a spacer made so that there is no chance of interference with the drive shaft... maybe it was needed, maybe not.

Quote:

---

Originally Posted by Mundy

I think alien d2 meant SWMBO, which stands for She Who Must Be Obeyed (from Rumpole of the Bailey tv show).

---

Well plucked up the courage and asked the wife, a shade over $1000 for the springs/shocks/damper.
All OME from ARB.
100% happy. carries the weight well at the expence off off road "softness", tends to flex less when running light.

Quote:

---

Originally Posted by wardy1

I once sought advice here on shocks.... all I got was Bilstein Bilstein Bilstein....guess what.... they are fantastic! If you're going to lift it, just ask for extended shafts, they are the same price.

As for the 'Removing Bars' I think they might be talking about removal of the front crossmember which runs under the front drive shaft. I took mine off...and recently put it back on. This is a structural support for the chassis and will allow for unwanted chassis flex if removed (or so I've been told by someone who has spent more time under Landies than just about anyone I know). I had a spacer made so that there is no chance of interference with the drive shaft... maybe it was needed, maybe not.

---

Thanks for the promt wardy1.
With lift the front drive shaft can touch the cross member at full flex.
I've spaced mine with a peice of flat steel and fitted longer bolts as the old ones had rounded the heads when removed.

sounds good! will check them out.

SO, i picked her up today, and i heard this strange wind noise.

turns out the rear passenger window, the guides that it sits in, the rear bit is missing the top half so its windy :( didnt pick this up on the test drive :(

anyone got any ideas? or where i can get replacement etc.

cheers

jack

try linn rover in kewdale mate.

Quote:

---

Originally Posted by jackerz

sounds good! will check them out.

SO, i picked her up today, and i heard this strange wind noise.

turns out the rear passenger window, the guides that it sits in, the rear bit is missing the top half so its windy :( didnt pick this up on the test drive :(

anyone got any ideas? or where i can get replacement etc.

cheers

---

Have a look down into the door.
I had this happen on a mates car and it had just gone down with the window;)
Draged it back up and glued it to the frame:)