Thread: Digital Clock in D2

Originally Posted by newlandyowner

Just had the radio out. There are no globes, just LEDs soldered into the circuit board...bugger!

Are you sure that they are LEDs and not the 3mm globes soldered to the PCB? I have some pictures of the globes that I replaced in my radio here: Entering Security code on Eurovox radio in D2

Originally Posted by trev

As mentioned yes it does have a light.
Approx $7 from dealer,may find alternatives from Repco etc.
It is a small fitting that is 1/4 turn to do/undo.
2 pieces of stiff card about the size of a credit card pushed in top and bottom will release the clips holding the clock in place,then just wriggle it out.

Trev.

Hi, I tried this and can not get it to go in on top or bottom. What am I doing wrong here? Anyone please

Thanks Steve

Originally Posted by Sharkee

Hi, I tried this and can not get it to go in on top or bottom. What am I doing wrong here? Anyone please

Thanks Steve

It takes a bit of fiddling, you have to get the cards in quite deep..
I found the if you use a credit card, insert it as if you're at the ATM, so long ways right over to one side, top And bottom.
Then, gently pull back. This should have released the clips on that side, and the side should pop out a bit.
Repeat on the other side and it should slide right out.

Thanks DM I managed to get them in but only the right side is releasing. Also does the door lock switch come out as well or just the clock

This may help a bit.
Pics




Right side freed


whole unit freed, so yes sharkee, the lock button too








Hope this helps.
Cheers
Muppet

Thanks so much mate that really helps heaps. Now to get it out lol wish me luck.

Thanks DM
Steve

Thanks DM mate your a legend, worked a treat
I just found with the top card I had to also slide it over to the left and out it popped
Now lights up and can see it.

Cheers mate
Steve

No dramas, happy to help.
I've pulled more bits out of my car in the super cheap auto car park than anywhere else
Cheers
Muppet