i would be very interested thanks![]()
Ladies and Gents,
Ive given up trying to source a battery tray which meets my needs. That is, to install two optima or similar size batteries in the factory battery location. So, being I own an engineering business, Im going to have my own made.
But will have either a sealed box at the rear (space permitting, where you can see the winch solenoid in the pictures above) or more likely a sheet metal rear wall with mounting points for the ecu there.
There is likely to be a need to trim the spot welded earth point in this location. The trim will not remove this earth point, but will remove the existing support/mounting point of the stock plastic box that is there at the moment, and intrudes into the required space.
If anyone is interested, please let me know.
Via PM ONLY!
Last edited by Pedro_The_Swift; 27th September 2010 at 06:12 AM. Reason: Not a vendor,,
i would be very interested thanks![]()
I would be very interested![]()
03 Disco 2a, TD5, Olso blue, 7 seater, Auto, Chipped, EGR'd, 2"lift, SLS, Dual Batteries, Provent, TM-2 engine saver
i would be very interested too![]()
Well, call me interested...![]()
Me too!![]()
Yes Please. One with sauce.
Well I use the ARB one up buy the turbo, but still very interested to see how this turns out, maybe squeeze a 3rd battery in there!!![]()
I modifyed my ARB tray to take a 75 a/h but would be interested for sure..what dimention battery's are you thinking will fit?
Cheers Ean
It is based on the popular Optima D34 series.
Specs available here:AGM Deep Cycle Battery, Batteries - Optima Yellow Top
The Exide Orbital Blue will also fit: http://www.exide.com.au/products/orbital.php
Interior tray dimensions are 355mm x 260mm.
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks