Thread: +2" SLS Air Springs?

Dont think these exist.

Instead spacers and modified brackets for the height sensor are used to trick the standard height.

Have a search for them, plenty of good comments about them.

Thanks rusty, I have read a fair bit about the spacers but would like to stay legal for insurance reasons. As for reprograming / tricking the ride height sensors, I don't like the idea of driving around with the bags near their limits. I did read somewhere about some one getting custom 4" air springs made so I was hoping that someone had heard of a +2" spring

Hi Mattyg,

I looked down this track a little while ago.... check out http://www.aulro.com/afvb/1283638-post28.html

This may help......

MattyG, Baffle helped develop the kit and is now running a +4"kit. He can fill you in on the details.
He's down the coast.
cheers, Dave.

Thanks for the info guys.

Pohm66 - which way did you decide to go with your lift and why? or didnt you do it?

Matt,
You can purchase bags that will give you the 2" raised ride hight you are after, you also have to space the self leveling arms,30mm spacers, easy to make.The bags need to be moved away from the chassis by 10mm and grind away any {over Bulging) weld where the bump stop is welded to the chassis.
These bags can go to 4" with out the space but you start restricting extention, it depends on what you want to do. your off rd raise button is safely fully functional too.http://www.aulro.com/afvb/discovery-...ng-d2-4-a.html