Results 1 to 7 of 7

Thread: Pipe Clip

  1. #1
    Join Date
    May 2010
    Location
    Melbourne
    Posts
    66
    Total Downloaded
    0

    Pipe Clip

    I have attached a photo of a (broken) plastic double pipe clip (?), spacer (?),
    form by D2. Approx 5mm. A few have broken, old age I guess.
    Does the forum know where replacements can be obtained.
    There is a number on it - POM & B4V0A. I have googled it but no luck.
    Cheers!
    Attached Images Attached Images

  2. #2
    Bearman's Avatar
    Bearman is offline TopicToaster Gold Subscriber
    Join Date
    Jun 2006
    Location
    Hay Point
    Posts
    4,043
    Total Downloaded
    0
    Have a look on ebay.com.uk. There is a lot of this sort of stuff there if you do a land rover search. You may be lucky!
    Cheers......Brian
    1985 110 V8 County
    1998 110 Perentie GS Cargo 6X6 ARN 202516 (Brutus)

  3. #3
    p38arover's Avatar
    p38arover is offline Major part of the heart and soul of AULRO.com
    Administrator
    I'm here to help you!
    Gold Subscriber
    Join Date
    Jan 1970
    Location
    Western Sydney
    Posts
    30,707
    Total Downloaded
    1.63 MB
    It would help if you told us where it is located and what clips into it.

    The pic is blurry but is it a "Clip - Brake Pipe Double, one hole" p/n ADU6075L
    Ron B.
    VK2OTC

    2003 L322 Range Rover Vogue 4.4 V8 Auto
    2007 Yamaha XJR1300
    Previous: 1983, 1986 RRC; 1995, 1996 P38A; 1995 Disco1; 1984 V8 County 110; Series IIA



    RIP Bucko - Riding on Forever

  4. #4
    Join Date
    May 2010
    Location
    Melbourne
    Posts
    66
    Total Downloaded
    0
    Sure.
    There is a pipe from top of radiator to top up bottle, underneath is a wire from top of radiator to sensor underneath bottle. Both approx same size. Both run next to jack carrier. Separated by two of these plastic "W" clips. Clips do not attach to the body, just the pipe and cable.
    Hope that makes sense.

  5. #5
    p38arover's Avatar
    p38arover is offline Major part of the heart and soul of AULRO.com
    Administrator
    I'm here to help you!
    Gold Subscriber
    Join Date
    Jan 1970
    Location
    Western Sydney
    Posts
    30,707
    Total Downloaded
    1.63 MB
    In the pic it looks like the channels in the clip are not of equal size. Is that correct? Can you take a focussed pic?

    The only double clip I can see in Microcat for the cooling system is ESR1489 but in the drawing it looks like the channels are equi-sized. This clip doesn't appear to attach to anything but there is something between the channels. It doesn't look like your pic.

    Microcat indicates there are three used on the car.

    Oh, BTW, is your car a petrol or diesel?
    Ron B.
    VK2OTC

    2003 L322 Range Rover Vogue 4.4 V8 Auto
    2007 Yamaha XJR1300
    Previous: 1983, 1986 RRC; 1995, 1996 P38A; 1995 Disco1; 1984 V8 County 110; Series IIA



    RIP Bucko - Riding on Forever

  6. #6
    Join Date
    May 2008
    Location
    Horsley Park, Sydney
    Posts
    2,939
    Total Downloaded
    0
    Hi, if this is a clip attached to the hard plastic line from the fill bottle to the radiator bottle, I would suggest replacing this line completely with a new coolant hose available from most auto accessory shops - sold by the meter. This line is known to become brittle and fracture.

    From memory it is an 8mm line.

    Erich

  7. #7
    Join Date
    May 2010
    Location
    Melbourne
    Posts
    66
    Total Downloaded
    0
    Thanks, the line looks OK but I'll check it also.
    Thanks for the tip on the ESR1489. It does look close so I'll call past ULR and double check.
    Thanks to all.

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!