Reply With QuoteI don't think so. I have seen people say that they have changed it without, but I don't think I believe them! I had to remove it.
Rgds
Pete
Fossicker
Hey all i know this topic has come up before but for those who have experience with changing out TD5 water pumps, is it possible to reomve the cover plate and water pump without removing the centrifuge and centrifuge oil drain? and also what tools could i use to make it easier i have some ratchet spanners and a good socket set but any other idead would be appreciated. Thanks
TopicToaster
I don't think so. I have seen people say that they have changed it without, but I don't think I believe them! I had to remove it.
Rgds
Pete
Swaggie
Just remove the water pump housing that supports the A/C compressor and power steer pump also, and fit the new pump on the bench. You will need a new housing to block Oring too.
JC
Fossicker
just finished the job...... bloody hell what a mission! just removed the centrifuge, it seemed like the easier option, was just in the nick of time too the bearing was absolutely catcus! thanks guys for reply's
Wizard
The bearing in the pump I take it.Originally Posted by bluelightdisco
just finished the job...... bloody hell what a mission! just removed the centrifuge, it seemed like the easier option, was just in the nick of time too the bearing was absolutely catcus! thanks guys for reply's
Regards
Robbo
Posting Permissions
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks