Nanocom help needed to program key fob! Penrith area

Quote:

---

Originally Posted by Urban Panzer

Its pretty simple with Nanocom, probably even easier with Testbook.

It will be under the BCU section in "security" or "programming", just follow the instructions.

As long as the key fob is new with the Barcode tag it should take less than 5 mins.

Before you do it tho, "pop" the current key open and look at the 6 figure code on the chip and make note of it. The reason for this is so you can see what "slot" its currently programmed to when you go to program the new one. It will stop you overwriting it by mistake. NOTE Testbook will show a long code, but "within" that code will be the 6 figure one you noted.

The keys can go in any slot 1 - 4. Keep the current key "out of the car" when testing the new one.

---

Ahh. I didn't see this post beforehand. Is it too late to go back an interrogate the system? Halil only has one remote.

All done!...many thanxs to Ron and all the rest as well.

Its easy enough with the Testbook, though both of us had never done it! took like 5 mins, just like Urban Panzer said. Got it right on the second try though, the first try, we didn't have a key on position 2 in the ignition!

...sigh...got to get myself one of these toys some day soon!