Reply With QuoteYeh, but not a stubbie holder.Originally Posted by The Angry Chook
From memory, I pinched some parts off the ashtray to make the holder work properly, as it kept springing out.
Fossicker
Yep, I fixed mine. Was a case of pulling out completely, swearing lots and managing to fluke it so it works properly. I did manage to strip on of the little grommety things.
They still go in and out but they are just as useless as before. They do fit a stubby though...
Sent from my HTC Desire S using Tapatalk
Wizard
SubscriberYeh, but not a stubbie holder.
From memory, I pinched some parts off the ashtray to make the holder work properly, as it kept springing out.
2002 D2 4.6L V8 Auto SLS+2" ACE CDL Truetrac(F) Nanocom(V8 only)
ChatterBox
SupporterAnd a full stubby will still fall out if you're not careful or if you are on a bumpy bend in the road
D4 SDV6, a blank canvas
The MOD Father
I seem to recall the cans will disturb the heater settings too--
"How long since you've visited The Good Oil?"
'93 V8 Rossi
'97 to '07. sold.
'01 V8 D2
'06 to 10. written off.
'03 4.6 V8 HSE D2a with Tornado ECM
'10 to '21
'16.5 RRS SDV8
'21 to Infinity and Beyond!
1988 Isuzu Bus. V10 15L NA Diesel
Home is where you park it..
[IMG][/IMG]
Master
They manage to put a fantastic cup holder in the armrest in the rear (expandable to fit any size cup) - but all they can do in the front is a flimsy, too small, put-something-in-and-it-changes-your-air-con-settings piece of uselessness.
Easy to take out and reseat the springs....do the ashtray and coin holder at the same time, but those little bits of plastic the springs push against are very flimsy and will break if not super careful.
I just leave mine out...it does hold the kid's milk bottles.
Has anyone installed a mid row arm rest cup holder in the front?
Master
To remove the whole asembly, just slip out both ashtrays and undo the 3 self tappers at the back of each ashtray area. On my 02 there are small spring steel thingys which push the main tray and the ashtrays outwards. There are little swinging plastic gizmos underneath which lock the trays back in. The swinging plastic gizmos can be interchanged. If the plastic has failed you can try epoxy and/or self tapping screws. This sort of bodge ususally fails shortly after I think I have acheived a cheap fix. 1 of my ashtray springs has dissappeared into the dash - any bright ideas on finding or replacing it?
Posting Permissions
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks