This is what RAVE says:
Purge
1. Turn the ignition switch off and wait 15
seconds.
2. Turn the ignition switch to position II and wait 3
minutes (this ensures that the fuel system
purges all the air from the fuel rail within the
cylinder head).
3. Fully depress the throttle pedal.
4. Keeping the throttle pedal fully depressed,
crank the engine.
5. As soon as engine speed exceeds 600 rev/min,
release the throttle pedal and the ignition
switch.The engine must not be cranked
continuously for more than 30 seconds at
any one time.
6. If the engine fails to start, repeat the above
procedure.
2002 D2 4.6L V8 Auto SLS+2" ACE CDL Truetrac(F) Nanocom(V8 only)
Reply With Quote
Bookmarks