Thread: Window Regulator Rrrrhhgggg

I went to the usual place for info. Thanks UP.
www.discovery2.co.uk / Rear Passenger door lock Assy
I was replacing the front lock, but found this instruction pretty right.

image-1351333043.jpg

Thanks for the link it covers the door lock not the window. I have the old one out but if I screw in the window bolts the bottom two on the left wont line up

image-3857840891.jpg

Then if I do the four around the motor I can't do the ones on the bottom of the window.


Hmmmmmm

Matt

Matt have alook at the Rave disk for a good step by step. I've removed the motor & reg following that but can't for the life of me remember the steps and I can't find my disk at the moment.

Anyone help out with the process?

The trick is in the window position. If memory serves you bolt the two window bolts so the slide is on the bottom of the window. You then need to get a couple of the motor bolts in and then use the motor (carefully!) to move the window up or down to locate the other two bolts. Remember to use loctitie its a pita to open everything up again just because the bolts come loose (will jam window!). Make sure the slide bolts are tight and the runners in a central position before running the motor to locate the last two bolts. hope that helps..

Thanks Panya.

I tried my Rave disc and it isn't working for some reason. it isn't recognising the cd when I put it in.

lining up my motor bolts is my main issue.

Thanks

Matt