Thread: ABS extensions, dealing with excess length?

I just coiled them up on the chassis in a safe spot and cable tied them in position.

And just left enough excess to allow for the extra travel?

Can the factory abs handle 3 inch of lift?

Matt

Originally Posted by mattg

Can the factory abs handle 3 inch of lift?

Matt

Depends more on how far the suspension drops, but I doubt very much for 3" at the rear. You'll probably be able to pull enough through on the front.

Yep, loose cable tied to the brake line to keep it off the wheel

hey question on this I need extra lenght for my rear RH side left is good with the lift but on the 33" the RH can not given join what have we got to extent the cable???

have tried to pull more out from under the car but dose not want to move!

Looked at making a extention off old bits

Originally Posted by Krayzie Keegs

hey question on this I need extra lenght for my rear RH side left is good with the lift but on the 33" the RH can not given join what have we got to extent the cable???

have tried to pull more out from under the car but dose not want to move!

Looked at making a extention off old bits

It like extension bits

So I ended up Looping the original at the lower clip and fitted the join between the two clips on the hose and tied the loose cable up, then the excess is looped up at the top tucked into the area at the chassis but as it drops it can pull free if needed. Given time I'll make some elasticised bits to pull it up out of the way but allow it to pull.