Page 5 of 5 FirstFirst ... 345
Results 41 to 49 of 49

Thread: Mirror Compass

  1. #41
    Join Date
    Jan 2011
    Location
    Kent, UK
    Posts
    91
    Total Downloaded
    0
    Quote Originally Posted by Mr Whippy View Post
    Pete. You have me confused. In your post number 35 you state that I should have every thing in place. Mine is a HSE with Harmon Kardon sound, yet in the above quoted post you say I need high line wiring harness.

    High Line/Harman Kardon equipped vehicles should have the wiring for heated and powered seats, as this is part of the High Line wiring harness specification.


    Depending on your vehicle's specification, you could have one of three different wiring configurations -

    1. No heated/powered seat wiring

    2. Wiring for manual heated seats - Brown 5-way connector, with Blue/Pink (RH) or Blue/Grey (LH) + Black (RH & LH)

    3. Wiring for powered heated seats - Brown 5-way connector, as above, + Brown/Purple (RH) or Brown/Green (LH) + Orange/Purple (RH & LH)


    Wiring configurations #2. or #3. above, will have a Brown 5-way connector under each of the front seats (see Note: below)

    The Brown 5-way connector looks like this -


    (this one is wired for heat and power)

    Note: If your vehicle is a late (2004) model, these brown connectors may not be under the seats, even if it's wired as at #2. or #3. above.

    Later models have a power 'link harness' for each seat, that plugs-in to the main harness under the centre console.


    If you have the wiring at #2. or #3. above, look behind the electric windows switch panel, and you should find the 5-way switch connectors for the heated seat switches (RH - Black, and LH - Green) -




    Paul.

    1989 Arles Blue 2.5TD 110 Hardtop
    1999 Epsom Green Discovery II 4.0 V8i 'XS'



    .

  2. #42
    Join Date
    Jan 1970
    Location
    Melbourne
    Posts
    2,622
    Total Downloaded
    0
    Quote Originally Posted by Mr Whippy View Post
    Pete. You have me confused. In your post number 35 you state that I should have every thing in place. Mine is a HSE with Harmon Kardon sound, yet in the above quoted post you say I need high line wiring harness. And yes I do have the full one piece fake wood console trim.
    Sorry to confuse you Ken, But the HSE is highest spec vehicle (in Aus) so it will come with the high line wiring harness. Paul, I see you are from the UK. You have a much greater choice than what we have...lucky bugger. Our spec's vary greatly from the UK, they have various trim levels up to number 7. In Aus we have up to number 3. Cheers. Sent from my iPad using Forum Runner

  3. #43
    Join Date
    Sep 2012
    Location
    Adelaide Hills
    Posts
    13,383
    Total Downloaded
    0
    Quote Originally Posted by sniegy View Post
    No!
    As Paul has said it is in the high line/spec models wiring loom.
    just to dig up an old thread, how do you tell if you have the high line wiring loom?

    i was able to connect up heated seats with no issues (just added switch), all that wiring was there.

  4. #44
    Join Date
    May 2003
    Location
    On The Road
    Posts
    30,032
    Total Downloaded
    0
    the harman kardon faceplates on the speakers?
    "How long since you've visited The Good Oil?"

    '93 V8 Rossi
    '97 to '07. sold.
    '01 V8 D2
    '06 to 10. written off.
    '03 4.6 V8 HSE D2a with Tornado ECM
    '10 to '21
    '16.5 RRS SDV8
    '21 to Infinity and Beyond!


    1988 Isuzu Bus. V10 15L NA Diesel
    Home is where you park it..

    [IMG][/IMG]

  5. #45
    Join Date
    Sep 2007
    Location
    Bairnsdale enjoying the rural view no rooftops to see here
    Posts
    2,450
    Total Downloaded
    0
    Not quite correct I have a base model and it had the wiring for the seats and mirror which are both working fine

    Sent from my GT-S7275Y using AULRO mobile app
    have a good one :D ken :wasntme:
    MY07 L320 RANGE ROVER SPORT MORE GOODNESS TO COME
    MY03 D2A TD5 EXTRA GOODIE ENHANCED :D now parting from life
    1996 D1 300TDI GONE
    08 ford ranger c/c
    WRECKING DISCOVERY 2
    PM ME FOR WHAT YOU ARE LOOKING FOR

  6. #46
    Join Date
    Sep 2012
    Location
    Adelaide Hills
    Posts
    13,383
    Total Downloaded
    0
    ok then, where is the plug for the mirror hiding? i'll go look for it.

    otherwise, easy to retro fit?

  7. #47
    Join Date
    Aug 2010
    Location
    Inner West Sydney Australia
    Posts
    166
    Total Downloaded
    0
    Its tucked up in the headlining, you might have to drop it a little to find the plug easily, which means maybe taking out the visors and dropping the map pocket holder assembly.


    Mines a mid level spec TD5 and it had the compass plug, and yes very easy on the scale of things to fit once you find the plug

  8. #48
    Join Date
    Sep 2007
    Location
    Bairnsdale enjoying the rural view no rooftops to see here
    Posts
    2,450
    Total Downloaded
    0
    you don't need to drop the map pockets just remove the blank panel where the sunroof switches would be and you should be able to reach the wires through there I did
    have a good one :D ken :wasntme:
    MY07 L320 RANGE ROVER SPORT MORE GOODNESS TO COME
    MY03 D2A TD5 EXTRA GOODIE ENHANCED :D now parting from life
    1996 D1 300TDI GONE
    08 ford ranger c/c
    WRECKING DISCOVERY 2
    PM ME FOR WHAT YOU ARE LOOKING FOR

  9. #49
    Join Date
    Jan 1970
    Location
    Free Again Thanks Dan
    Posts
    10,150
    Total Downloaded
    0
    Quote Originally Posted by Outback 1 View Post
    you don't need to drop the map pockets just remove the blank panel where the sunroof switches would be and you should be able to reach the wires through there I did
    x2 And we did the same on mine aswell

Page 5 of 5 FirstFirst ... 345

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!