Thread: Time to chip

There is quite a lot of info on Chipping for the TD5 on the Forum.
I have a feeling your ECU will be the MSB prefix # and therfore will need to be opened and chipped. The later NNN prefix # ECU can be reflashed.
TRS in Adelaide do a reasonable map for the MSB ECU or there are options for NNN remap which will require you to have access to suitable Diagnostic equipment for the upgrade to be done.

For you this means if an MSB ECU, you can send it away to be "Chipped" or (if you have Diagnostic tool like Nanocom or Hawkeye) you can have them send a Chipped ECU to you, load your injector codes and Security settings, then send the old unit back to them.

Check the "Members with Diagnostic Equipment" thread and see who is Darwin and go from there.

cheers

02 D2 Auto has NNN ECU and can be programed via a nanocom purchase a new map file and upload try td5 INSIDE The ultimate solutions for remapping TD5´s you'll have your new file within 24hrs - lots of guys on the forum use these maps including myself...Joe

Thanks guys, have had a bit of a read. now just need to find where I can get a Nanocom!