Results 1 to 6 of 6

Thread: CDL, SRS ???

  1. #1
    Join Date
    Apr 2011
    Location
    Sydney
    Posts
    182
    Total Downloaded
    0

    CDL, SRS ???

    Hi all,

    My Disco ii, td5, auto, 2000 had a CDL fitted a few months ago; Since then, I've had the Disco out twice.

    The first time, the gears hit a neutral. It didn't matter where I moved the T-bar, there was no gears... Changed from CDL locked position to normal and all the gears came back.

    The second time (Today), the SRS light came on in the instrument panel. A few minutes later, while climbing a hill, I heard and all mighty bang (like a CV cracked-exploded) and I had no gears. I moved the CDL from locked to normal and back and all the gears came back and finished climbing like nothing happened.

    Question:
    What can I do about the SRS in the instrument? What's blown? Is this a common issue? Like the 3 amigos?

    Is the CDL issue also common?

    Cheers.

  2. #2
    Join Date
    Jan 2010
    Location
    Adelaide
    Posts
    601
    Total Downloaded
    0
    Probably jumped out of gear, may need adjusting or may not have been fully home

    No idea on the SRS

  3. #3
    Join Date
    Jan 1970
    Location
    Douglas Park, NSW
    Posts
    9,347
    Total Downloaded
    0
    1,
    Transfer case is jumping out of low/high range. Select it while rolling very slowly in N (auto) & push it firmly. Push it again after travelling a few metres to make sure it's fully home.

    2,
    Check the connections (should be yellow harness) under the seats. Sometimes adjusting a seat will move the connector/harness if it's in the wrong spot.
    Scott

  4. #4
    Join Date
    Nov 2008
    Location
    Roleystone, Perth
    Posts
    891
    Total Downloaded
    0
    What Scouse said. Jumping out of H or L, just adjustment. The SRS as he said is under the passenger seat, but if anything was under there, you may have stripped or broken a wire. Check here to re connect.

    cheers
    Nick

  5. #5
    Join Date
    May 2003
    Location
    On The Road
    Posts
    30,031
    Total Downloaded
    0
    They do go BANG hey

    I change mine by selecting D then R then N and shove hard.
    I'd rather not be rolling as lately I'm only doing this with the van on the back--
    "How long since you've visited The Good Oil?"

    '93 V8 Rossi
    '97 to '07. sold.
    '01 V8 D2
    '06 to 10. written off.
    '03 4.6 V8 HSE D2a with Tornado ECM
    '10 to '21
    '16.5 RRS SDV8
    '21 to Infinity and Beyond!


    1988 Isuzu Bus. V10 15L NA Diesel
    Home is where you park it..

    [IMG][/IMG]

  6. #6
    Join Date
    Apr 2011
    Location
    Sydney
    Posts
    182
    Total Downloaded
    0

    Thank you all

    Thank you all.

    It's all sensible and common sense approaches.

    This morning, I noticed the SRS light is off, and the new CDL shifter seems a little to close to the right - there's no room between the shifter and the console.

    Next weekend, I'm hoping to take the console and plate out and do a little re-adjustment of the CDL. And have a look under the passenger seat at the connection. There was someone sitting there - passenger rear. My guess, they may have kicked it.

    I'll report back as soon as I know more.

    Cheers, and thank you.

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!