Thread: fault codes 00 v8

Dan

Lambda sensor is the oxygen sensor and considering you didn't have it makes sense.

Regards
Andrew

thanks andrew i was hoping thats what it was

The faults are possibly pre-existing so the best thing to do is clear the faults and see if they return. If they come back then you need to start looking at them.

I've attached the LR diagnostics for these faults.
The "&!" are supposed to be "Ω" symbols.

Pages 18-2-53 and 18-2-54 RAVE includes a description of what the Drive Cycles are.

The European On-Board Diagnostics Workbook pdf on the D2 RAVE CD has a listing of every P code applicable to the D2 V8 and the LR specific meaning of those codes where applicable.

Thanks off track, but most of that doesn't mean anything to me unfortunately lol it's like a different language hahaha

I will reset them and touch wood they don't come back!!

Dan
if it is the O2 sensors see my post today on another parts source recommended
local best price was $167 + post,US price less than half that posted.
Paul

Originally Posted by Modelsp

Dan
if it is the O2 sensors see my post today on another parts source recommended
local best price was $167 + post,US price less than half that posted.
Paul

Thanks mate, Bruce said the 02 sensors were 100% so I will wait and see if they throw a code again, I went for a drive to the pool yesterday and checked when I got there it was fine also when I got home it was fine again, my guess is it was stored from when he was chipping it, mabey after he cleared them he started the car again and they stored and he didn't hook up his computer again

Thanks heaps for the help guys I'm a little (a lot) outa my comfort zone when it comes to fault codes and what not.... I'm slowly learning little by little

Cheers again

Originally Posted by Andrew D

Dan

Lambda sensor is the oxygen sensor and considering you didn't have it makes sense.

Regards
Andrew

I hope they do or someone's done a bang up job of adding them to mine including the wiring.

The upstream is pre cat, bank 2 is LH. Won't have down stream, NAS spec only.

Originally Posted by clubagreenie

I hope they do or someone's done a bang up job of adding them to mine including the wiring.

In the Davis Chip thread Dan mentioned his pre-cat sensors were either not there, removed or not plugged in. Can't recall exactly but consider this, it would provide some justifcation for the fault.

He has since had them reinstated.

Regards
Andrew