Thread: VNT Turbo install

The issue that you have now is that the installer has stuffed up the VNT settings which were set by turbotecnics. On mine the shaft was marked from factory, as so could be lined up again, hopefully this is the case for yours too...

Originally Posted by Mundy

Had the turbo readjusted this morning by the installer, bypassing modulator. Max boost set to be about 22psi. Goes like a gun now. Wound it most but not all of the way back to the original setting, from what I can tell. Suppose it gives me some room to move. Thanks again to all for assistance.

Once again, they're not meant to be adjusted - so having "room to move" is not the ideal... I would suggest setting it back to the original setting as per the Turbotecnics specifications.