Thread: Disco 2 SLS Resurrection. Help needed.

Ok the bags are in now. No compressor or valves yet but I have a short length of 4mm pipe with a schrader valve on the end. I just used a foot pump to pum them up.

God knows why anyone would replace bags with coils. It took me 3 times longer to get the old coils out than it took to fit the new bags.

The old coils with helper bags.




2 Inch spacer installed.



Bag in



Bag partly inflated.



My Standard height. This is about 2 inches over standard.



Dumped. I have discovered I need to space my bump stops down a bit.



2 Inches above my ride height. This is about 4 inches over standard.



3 Inches above my ride height (5 above standard). I think it was 620mm wheel center to guard. I doubt I'll need this setting.



Just another of the highest setting.

Originally Posted by walker

Just be careful jacking it up that high. While the airbags will go that high, it flogs out the watts link bushes, even just doing for short periods. I know....it happened to me.

All good mate. I'm just playing around. No driving at that height.

It will be just running at the 2 inch lift which I don't think should be a problem.

The 2 inch lift (2 inch extra or 4 inches over standard) setting cancels at 8km/h.

Happy Days.