Thread: A preventative measure on abs sensor leads

I recently fitted a new hub and then had the amigos visit intermittently after several successful weeks of having a strangely dark dash. It turned out the new abs lead was rubbing against the cv boot and eventually failed. I'm not sure if it was my incompetence in fitting the lead but I bought a new lead and this time I have used a cable tie to hold the grommet in place. You can see the cable tie in the attached photo. I removed this one after realising the top bolt for the calipers was in a difficult position being behind the lead. I replaced it and adjusted the slack on the sensor lead.

I forgot to say that the reason the lead was hitting the CV boot was because the grommet fell out of the support. No idea why.