Results 1 to 4 of 4

Thread: Code P1592 ???

  1. #1
    Join Date
    Dec 2012
    Location
    PRIMBEE, Wollongong NSW
    Posts
    336
    Total Downloaded
    0

    Code P1592 ???

    I have this code p1592 on my Nanocom evo and am trying to find what it means,as usual i'm getting nowhere fast.would one of you fine chaps try and explain it to me and what i need to do to fix it.it was there before i replaced the coils yesterday.
    thanks again
    Paul

  2. #2
    schuy1 Guest
    That is a "ABS rough road signal high" The unit has detected a possiblefault in the SLABS or a faulty connection or a faulty sensor. It can also just be the rough road has interrupted the signal from a sensor. Clear it and see if it comes back.
    Cheers Scott

    I sort of read that wrong in RAVE, The unit can suspend the ABS system if a rough road signal is detected until the vehicle has finished traversing the rough road. This apparently can also generate the fault code.
    Last edited by schuy1; 18th August 2013 at 09:50 AM. Reason: more

  3. #3
    Join Date
    Dec 2012
    Location
    PRIMBEE, Wollongong NSW
    Posts
    336
    Total Downloaded
    0

    Code p1592??

    thank you
    i also have the ABS light on so this would explain it,Maybe ABS pump failure???
    Paul

  4. #4
    schuy1 Guest
    The "rough road" signal may also turn on the ABS light. The ECU does all of that to prevent the ABS thinking there is a braking need and activating. Which could be "interesting" at 80kmh on a dirt road! Unless there is other indicators in the system the ABS pump is unlikely to be faulty
    The info on how it operates is on page 507 in the RAVE.
    Cheers Scott

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!