power wire to rear

Quote:

---

Originally Posted by Mundy

There is a rubber grommet on either side of the fire wall through which you can feed a wire/cable. Then run the cable under the plastic strips along the edges of the door openings (take out cover strips and remove screws). When you get to the rear there area number of options. For one purpose, I ran the cable under the carpet up the wheel arch and out the hole in the carpet for the hold down ring; in a second I continued the cable under the carpet into/under the rear panier boxes.

---

Yep I did this last month. Ran two 6mm wires to the back for the fridge. I picked the power up from the B+ in the fuse box and put an inline fuse in there also. Took an hour or two

If I were you I would ( and I did) put in a 4 AWG wire in case you want to put more stuff in later.

I also have a 300watt inverter run through an anderson plug , and my compressor which connects to the same plug. Reason for compressor to rear is the camper trailer tyres.

Obviously with a 4 AWG , you cannot tap from the fuse box. I have reversed my batteries and the accessory battery is in the first position.

Jaycar do very good maxi blade fuses in clear covers and I have fitted one to the rear of my under bonnet fuse box.
I have run my cable along the RH chassis rail completely covered with split tube.
Regards Philip A