Results 1 to 7 of 7

Thread: OME Springs

  1. #1
    Join Date
    Oct 2009
    Location
    Victoria
    Posts
    20
    Total Downloaded
    0

    OME Springs

    Who's used these, which ones did you use and what was your experience?

  2. #2
    alien's Avatar
    alien is offline A Keeper of the TGO Silver Subscriber
    Join Date
    Jun 2009
    Location
    Bacchus Marsh Vic.
    Posts
    3,337
    Total Downloaded
    0
    I run the OME springs with their Nitro shockers.
    Mines set to tour(weight carrying) rather than play(flex).
    I have the heaviest spring rating due to the weight I carry on trips.
    I find it good when loaded heavily(>3,200KG) on trips etc..
    In "daily" mode(@2,700Kg) it feels like it picks a wheel up easier than the stock springs did when off roading.
    I'm very happy with the feel and comfort when on the highway.
    Cheers, Kyle



    The Good Oil.
    When did you last visit?
    http://www.aulro.com/afvb/good-oil/



  3. #3
    alien's Avatar
    alien is offline A Keeper of the TGO Silver Subscriber
    Join Date
    Jun 2009
    Location
    Bacchus Marsh Vic.
    Posts
    3,337
    Total Downloaded
    0
    A little reading you may find interesting...
    http://www.aulro.com/afvb/discovery-...td-height.html
    Cheers, Kyle



    The Good Oil.
    When did you last visit?
    http://www.aulro.com/afvb/good-oil/



  4. #4
    Join Date
    May 2009
    Location
    Tatura, Vic
    Posts
    6,336
    Total Downloaded
    0
    I inquired about these at my local ARB store, but was told that they only do a 40 mm lift, and I wanted to go 50mm, so I ruled these out.
    Dave.

    I was asked " Is it ignorance or apathy?" I replied "I don't know and I don't care."


    1983 RR gone (wish I kept it)
    1996 TDI ES.
    2003 TD5 HSE
    1987 Isuzu County

  5. #5
    Join Date
    Oct 2009
    Location
    Victoria
    Posts
    20
    Total Downloaded
    0
    Thanks for the info alien...

  6. #6
    Join Date
    May 2011
    Location
    Wyndham Vale. Vic.
    Posts
    624
    Total Downloaded
    0
    Talk to Shane at Oppisite Lock at Melton & he will point you in the right direction. Just fitted Dobinson 50 mm coils and hydraulic shocksto D1 & the vehicle has a completely different ride.

    Sent from my GT-N8020 using AULRO mobile app

  7. #7
    Join Date
    Oct 2012
    Posts
    20
    Total Downloaded
    0
    OME may say they are only 40mm, but that is a safe statement.. ie, a minimum of 40mm.. all depends on vehicle set up versus what rating spring you have.

    I have the heaviest rated springs, as I was fitting a ARB bulbar, winch, dual batt's etc, and after comparing between the height with standard springs BEFORE FITTING THE BULL BAR ETC and height of new springs with bull bar etc, the new springs lifted the vehicle 72mm from where it was (even with the winch etc fitted!!)

    Flexes well also..

    Also of note is that it wasn't all due to the sag of the standard front ones (only had 150000 km on them) as the rear is SLS and had been lifted 50mm already with spacers and sensor brackets and I had to make longer brackets to lift it a further 20mm to level it out! This goes to show the front springs may not have been too sagged..

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!