Results 1 to 8 of 8

Thread: Acoustic cover won't come off

  1. 29th October 2013, 07:24 PM #1
    Nova
    Nova is offline Master Subscriber
    Join Date
    Oct 2010
    Location
    Near Adelaide
    Posts
    102
    Total Downloaded
    0

    Acoustic cover won't come off

    Hi All,

    I cannot get my acoustic cover off, the drivers side bolt is spinning and won't undo. I assume from reading here there is a captive nut behind the cover mounted to the underside of the inlet manifold that has come free. Has anyone else had this problem and what worked to fix it?

    I have tried some force to pull the bolt sideways but no improvement. I can't get my hands underneath the cover far enough to feel anything and cannot reach up far enough from underneath the car either. Feeling a little stumped.

    I need to sort the fuel cooler as it has a small coolant leak but can't until I remove the cover. Any thoughts welcome.

    Cheers,
    Nova
    Reply With Quote Reply With Quote
  2. 29th October 2013, 07:33 PM #2
    Graeme
    Graeme is offline Swaggie Vendor
    Join Date
    Jan 1970
    Location
    NSW SW Slopes
    Posts
    12,039
    Total Downloaded
    0
    The cover can be pulled over the gromet with enough force and persistance. Lift the cover from the left side and gradually work the gromet and bolt head through.
    MY21.5 L405 D350 Vogue SE with 19s. Produce LLAMS for LR/RR, Jeep GC/Dodge Ram
    VK2HFG and APRS W1 digi, RTK base station using LoRa
    Reply With Quote Reply With Quote
  3. 29th October 2013, 07:42 PM #3
    Nova
    Nova is offline Master Subscriber
    Join Date
    Oct 2010
    Location
    Near Adelaide
    Posts
    102
    Total Downloaded
    0
    Thanks, I'll give that a "gentle" go. Also just remembered I have a parcel here with your name on it (ACE controller), must get to the post office soon.

    Cheers,
    Nova
    Reply With Quote Reply With Quote
  4. 29th October 2013, 11:11 PM #4
    harps's Avatar
    harps
    harps is offline Fossicker
    Join Date
    Dec 2012
    Location
    Melbourne
    Posts
    29
    Total Downloaded
    0
    Same thing happened to me the other night.

    I just put a big flat head screw driver under the head of the bolt and put leverage on the bolt so that the clinch nut on the rear of the bracket was forced to bite in to the bracket. This creates enough friction between the nut and the bracket to be able to undo the bolt. One hand on the screw driver levering the bolt, the other hand on the socket undoing it.
    Reply With Quote Reply With Quote
  5. 30th October 2013, 08:46 AM #5
    Nova
    Nova is offline Master Subscriber
    Join Date
    Oct 2010
    Location
    Near Adelaide
    Posts
    102
    Total Downloaded
    0
    Thanks Harps, I had tried that already, it didn't seem to work, maybe I didn't apply enough force to the bolt head. I'll have to have another go before I try and pull it over the rubber grommet.

    Cheers,
    Nova
    Reply With Quote Reply With Quote
  6. 30th October 2013, 10:01 AM #6
    Graeme
    Graeme is offline Swaggie Vendor
    Join Date
    Jan 1970
    Location
    NSW SW Slopes
    Posts
    12,039
    Total Downloaded
    0
    I didn't initially know about pulling from the other side so ended-up cutting the head off with an angle grinder as there was no way to stop the nut from turning.
    MY21.5 L405 D350 Vogue SE with 19s. Produce LLAMS for LR/RR, Jeep GC/Dodge Ram
    VK2HFG and APRS W1 digi, RTK base station using LoRa
    Reply With Quote Reply With Quote
  7. 30th October 2013, 10:24 AM #7
    MR LR
    MR LR is offline ChatterBox
    Join Date
    Apr 2009
    Location
    South Sydney
    Posts
    2,499
    Total Downloaded
    0
    I tore it off over the rubber grommet, safe to say the stupid thing hasn't gone back on!
    Reply With Quote Reply With Quote
  8. 31st October 2013, 06:51 AM #8
    schuy1 Guest
    Quote Originally Posted by MR LR View Post
    I tore it off over the rubber grommet, safe to say the stupid thing hasn't gone back on!

    TSK TSK! Men in striped aprons and suchlike!
    Cheers Scott
    Reply With Quote Reply With Quote
« TD5 HARMONIC BALANCER BROKEN OFF. | Auto trans filter »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!