That would be a lot of effort to go to. Have you considered using fly wire mesh over the front grille?
David
'02 Td5 Disco
The four heat exchangers are all sandwiched closely together with the AC condenser at the front, the ATF cooler and intercooler in the middle, and the radiator at the back. On a couple of trips we have done a bit of off track work through the spinifex and I have managed to clog these elements with spinifex seeds, resulting in overheating.
Because they are squeezed tightly together it is very difficult to remove the accumulated vegetable matter. Even back home using the Karcher and compressed air wouldn't clear it out. I have had to remove the radiator and intercooler.
I wondered if it might be possible to relocate the AC condenser to the roof- lying flat between the roof rack and the roof.
Has anyone done this? Any thoughts?
That would be a lot of effort to go to. Have you considered using fly wire mesh over the front grille?
David
'02 Td5 Disco
It could be done but if lying flat it would need a fan. As DiscoDB said though, it would be a lot of work and expense.
Dave.
I was asked " Is it ignorance or apathy?" I replied "I don't know and I don't care."
1983 RR gone (wish I kept it)
1996 TDI ES.
2003 TD5 HSE
1987 Isuzu County
Moving 1 will still leave the 3 open to blocking or damage...
Really just make yourself a good mesh unit to install from below the bar up over the top of the grill for such trips...
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks