Thread: Headgasket YAY

1 hole it is then , bit hard to tell against the background but top right of the photo on the edge of the gasket approx 90 mm down from front of gasket
That be the hole

i cant see any obvious problems with that HG, what am i not seeing?

Cool i thought so thankyou discorevy the head moved eevo which is why the head gasket went. The actual gasket did not actually fail. They are a none reusable item as far as im aware anyway even if look fine.

Originally Posted by Pippin

I think in the second photo you can see that it is a 1 hole gasket.


Cheers
Nick

You can usually tell by the imprint left behind by the gasket.

Originally Posted by Pippin

You can usually tell by the imprint left behind by the gasket.

Well , you could tell if the holes were over the block, which on a TD 5 they are not, sorry Pippin. Nice try

Not being one to give up easily I'll have a look in the morning and eat humble pie then if I am wrong.

Humble pie it is for my breakfast discorevy. But I still think I can see a gasket on the 2nd picture down, must be like the Turin Shroud then

You may be a mechanical medium , able to envision the torment the gasket suffered in its last few weeks.