Results 1 to 6 of 6

Thread: TD5 Disco 2 Stopped

  1. #1
    Join Date
    Jun 2012
    Location
    Perth Australia
    Posts
    56
    Total Downloaded
    0

    TD5 Disco 2 Stopped

    Hi guys, have been driving my disco to work and just started loosing power, the. Temp gauge went right up the the gearbox m/s lights have come up and then she stopped. Water levels are fine battery is putting out 12.7 with everything off. Here's the tricky bit, I have about 3 relays in the engine fuse box that are chattering, it's the engine relay, fuel pump and another one. They go crazy then stop then go again. I have checked wiring harnesses and the main earth on the engine but no luck. The engine cranks fine but just won't go.

    Any ideas what it is.

    All help appreciated !!

  2. #2
    Join Date
    May 2003
    Location
    On The Road
    Posts
    30,031
    Total Downloaded
    0
    bump!
    "How long since you've visited The Good Oil?"

    '93 V8 Rossi
    '97 to '07. sold.
    '01 V8 D2
    '06 to 10. written off.
    '03 4.6 V8 HSE D2a with Tornado ECM
    '10 to '21
    '16.5 RRS SDV8
    '21 to Infinity and Beyond!


    1988 Isuzu Bus. V10 15L NA Diesel
    Home is where you park it..

    [IMG][/IMG]

  3. #3
    Join Date
    Jun 2010
    Location
    Fremantle
    Posts
    555
    Total Downloaded
    0
    Where are you?
    Could be something as simple as an earth problem
    03 Disco 2a, TD5, Olso blue, 7 seater, Auto, Chipped, EGR'd, 2"lift, SLS, Dual Batteries, Provent, TM-2 engine saver

  4. #4
    Join Date
    Jun 2012
    Location
    Perth Australia
    Posts
    56
    Total Downloaded
    0
    Perth north of river
    Have just picked it up about 10 mins ago and she starts ?? I will check all the earths because that's what it seemed like to me.

  5. #5
    Join Date
    Jun 2010
    Location
    Fremantle
    Posts
    555
    Total Downloaded
    0
    Hope it's something nice and simple
    03 Disco 2a, TD5, Olso blue, 7 seater, Auto, Chipped, EGR'd, 2"lift, SLS, Dual Batteries, Provent, TM-2 engine saver

  6. #6
    Join Date
    Jun 2012
    Location
    Perth Australia
    Posts
    56
    Total Downloaded
    0
    So a bit of an update. Pulled out the fuse box last night cleaned up all of the terminal and connections blew it out and put it all back in. Have tried to replicate the fault I had in many different ways and happy to say so far there have been no issues. Fingers crossed thanks for the help guys !!

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!