I dont undertand exactly what you want to do but i can tell you that brown is the main feed coming from the fusebox, white/red is crank position, yellow and white are ignition on(pos 1/2A) and green/white is auxiliary position
Gday all.
Doing some work on the TD5 and need to wire in a remote starter.
Have done it before but can only remember to connect to starter energiser feed.
In the interests of safety, I previously wired it as a manual bridge around the relay, so ign to iii then spring loaded toggle to activate.
What I can't figure out is which wire to come off after the ign white/red??
Any ideas?
Thanks in advance.
Dave
Cheers, BDave.
Replace "You are...!", with "Are you...?"
Army Land Rover Buyers Guide.
buymilitaryvehicles.com
Reunited with RFSV 51 680, 'Sleazy'!!
'00 VeryDisco TD5 Auto,
Nanocom Evo for D2 TD5 and Puma
Gone:RFSV, 51-699, Carryall 48-358.
I dont undertand exactly what you want to do but i can tell you that brown is the main feed coming from the fusebox, white/red is crank position, yellow and white are ignition on(pos 1/2A) and green/white is auxiliary position
Discovery Td5 (2000), manual, tuned
So, I was making a simple situation more complex than needed. A first for me)
White/ red through Spring loaded switch to Brown/ Red. Job done!
Cheers, BDave.
Replace "You are...!", with "Are you...?"
Army Land Rover Buyers Guide.
buymilitaryvehicles.com
Reunited with RFSV 51 680, 'Sleazy'!!
'00 VeryDisco TD5 Auto,
Nanocom Evo for D2 TD5 and Puma
Gone:RFSV, 51-699, Carryall 48-358.
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks